Home
Главная
Vitek
Утюг
VT-1227
Инструкция по эксплуатации Страница: 5

Vitek VT-1227 Инструкция по эксплуатации онлайн [5/40] 25264

Vitek VT-1227 Инструкция по эксплуатации онлайн [5/40] 25264

5

ENGLISH

Marks Fabric type (temperature)

•

Synthetics, nylon, acryl, polyester

(low temperature)

•• Silk/wool (medium temperature)

•••

(max)

Cotton/linen (high temperature)

• This table is only for smooth materials.

Fabrics of other types (crimped, raised

etc.) are best ironed at low temperature.

• First sort items by ironing temperature:

synthetic materials to synthetic materials,

wool with wool, cotton with cotton etc.

• The iron heats up faster than is cools

down. For this reason it is recommended

to begin ironing at low temperature (for

instance synthetic fabrics).

• After that, move to higher temperature

ironing. Cotton and linens should be

ironed last.

• If an item is made of a mix of fabrics, then

the iron should be set for the fabric with

the lowest ironing (for instance if an item

is made of polyester and cotton, it should

be ironed at the temperature used for

ironing polyester “•”).

• If you cannot define the fabric the item is

made of, find a place on it that is hidden

while wearing and, on practice select the

ironing temperature (always start at the

lowest and gradually raise it until you get

the desired result).

• Corduroy and other fabrics that start

glossy quickly should be ironed strictly in

one direction (along the pile) with slight

pressure.

• To avoid appearance of glossy spots on

the synthetic and silk fabrics, iron them

back-side.

SETTING THE IRONING TEMPERATURE

• Lift the handle (6) and it will lock, to lower

the handle (6) press the (11) button and

lower the handle

• Before connecting the iron to the electric

network set the power supply switch (14)

in correspondence with the voltage of

the electric network. After usage of the

iron with network voltage 120 V always

set the switch (14) to the 240 V position, it

will prevent malfunction of the iron while

connecting the iron to the electric net-

work with the increased voltage.

• Unwind the power cord and insert the

plug into the socket.

• Set the temperature control (9) to the

required ironing temperature: “•”, “••”,

“•••”, “MAX” depending on the type of

fabric, the (7) indicator will light up.

• Place the iron vertically.

• When the sole (12) temperature reaches

the desired temperature value, the (7) in-

dicator will go out, you can start ironing.

Note: When using the unit for the first

time, the heating element of the unit

burns that is why some smoke or for-

eign odor can appear. It is normal.

IRONING WITHOUT STEAM

• Set the constant steam supply on/off

button (2) to the upper position (steam

supply is off).

• Set the temperature control (9) to the re-

quired ironing temperature.

• Place the iron vertically.

• When the sole temperature (12) reaches

the desired temperature value, the (7) in-

dicator will go out, you can start ironing.

• After operation, take the plug out of the

socket and wait until the iron cools down

completely.

• Press the (11) button and lower the iron

handle (6) down.

WATER SPRAYER

You can dampen the fabric, by pressing the

spray button (3) several times.

• Make sure that there is enough water in

the water tank.

STEAM IRONING

While steam ironing set the temperature

control (9) to the “MAX” position.

1227.indd 51227.indd 5 21.03.2011 12:51:3621.03.2011 12:51:36

Похожие устройства