HP F550G [8/37] Setting the universal time code utc

2.4 Powering the Camcorder On / Off

2.4.1 Auto Power On/Off

Once the vehicle engine is started, the camcorder automatically turns

on. If the Automatic Record function is enabled, the recording will

automatically start right after the camcorder turns on.

2.5 Initial Settings

Before using the camcorder, we recommend you to set up the correct

Date and Time and Automatic Record.

2.5.1 Setting the Universal Time Code (UTC)

Depending on your location, you may need to change the current UTC

setting of the camcorder so that the correct date and time are

updated when a GPS signal is detected.

1. If recording is in progress, press the button to stop

recording.

2. Press the button to open the OSD menu.

3. Use the

or buttons to navigate to the Satellite

Synchronization option and press the OK button. Ensure that

the On setting is selected and press the OK button again to view

the UTC setting.

4. Refer to the UTC Map below and use the or button to

select the desired setting and press the OK button to confirm

the setting.

5. Press the button to exit the menu.