Kuppersberg HGG 663 T [11/36] Code connection and that all screws are lightened suffi ciently
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kuppersberg HGG 663 T [11/36] Code connection and that all screws are lightened suffi ciently

Kuppersberg HGG 663 T [11/36] Code connection and that all screws are lightened suffi ciently
11
ENGLISH TECHNICAL PASSPORT
Gas oven
must be connected to the terminal
marked ‘N’ or coloured blue or black.
The wire coloured Brown must be
connected to the terminal market ‘L’ or
coloured brown or red.
NOTE:
The electrical outlet is to be
positioned in an easily accessible
position adjacent to the appliance. In
the event that it is necessary to replace
the mains lead, the replacement must
conform to the speci cation listed in
the Tecnical Data ensuring the correct
colour
code connection and that all
screws are lightened suf ciently.
CONNECTING TO THE GAS
SUPPLY
The gas supply system must
conform to current local law.
The type of gas for which the oven
has been adjusted is shown on the
rating plate on the lower edge of the
oven front (visible with the door open)
and on the packing.
Before making the connection,
adjust the oven to the type of gas in
the home.
The connection between the gas
connection and teh pipe must be made
in one of the two following ways (see
the drawing on bottom page):
using a connector without
a sealing ring (the oven connector is
conical: ISO R 7)
interposing the metal
sealing ring provided.
Attention: when nished check
that there are no gas leaks. Use soap
and water, or another liquid suitable
for the purpose, to check for gas leaks.
Do not use a ame to search for gas
leaks.
Warning: the use of exible
rubber tubing attached to the outlet
connector is prohibited because it
cannot be inspected.
Adapting to the gas in use
It is possible to use other types of
gas by adapting the burner adjusment
as follows: Make sure that the oven is
not connected to the electric power
supply.
Open the oven door completely
and remove the oven bottom. Remove
the burner by unscrewing its screw,
then unscrew the injector and replace
it.
Reassemble the burner in the oven
and the oven bottom.

Содержание

Похожие устройства

Скачать