Remington HC5900 [9/184] English

, EVERY SIX MONTHS

• Remove the 2 screws retaining the xed blade with a screwdriver. Do not

remove blade set.

• Brushouthairsfrombetweenthebladeswithsoftcleaningbrush.Donot

remove the lubricating grease from the blades. It is not necessary to

remove the small moving blade from the unit.

• Ifthemovingbladehasbeenremovedthiscanbere-ttedbyslottingthe

coated blade holder over the pin in the centre of the interior product head.

• Thegrooveonthecoatedblade,justbelowtheteeth,restsonametalplate

at the opposite side to the screw holes. The xed blade is tted with the

raised prole pointing outwards and xed with the 2 screws.

• Ifthebladesarenotcorrectlyaligned,cuttingeciencywillbeimpaired.

, CLEANING CAUTIONS

• Ensure the appliance is switched o and unplugged from the mains before

cleaning.

• Donotuseharshorcorrosivecleanersontheunitsortheirblades.

BATTERY REMOVAL

• Theappliancemustbedisconnectedfromthesupplymainswhen 

removing the battery.

• Turnthetrimmeronanddischargeallremainingpower.

• Removethecombattachment.

• Detachthebladecartridge.

• Prythedecorativepanelothetophousingtoexposethe6screwslocated

in the inner housing.

• Unscrewthe6screws.

• Prytheinnerhousingapartfrombottomhousingtoexposetheinternals

and printed circuit board.

• Removethebatteryandprintedcircuitboardassemblyfromthebattery

chamber.

• Disconnectthebatteryfromthecircuitboard.

• Thebatteryistobedisposedofsafely.

H ENVIRONMENTAL PROTECTION

To avoid environmental and health problems due to hazardous

substances in electrical and electronic goods, appliances marked with

this symbol must not be disposed of with unsorted municipal waste,

but recovered, reused or recycled.

ENGLISH

GBDNLFEIDKSFINPSKCZ

HUN

PLRUTRROGRSI

AE HR