Remington HC5700 [8/168] English

• Toreattachoncethebladesarecleanedanddry,alignthebottomofthe

blade with the bottom blade housing tab and slide the cartridge back into

place until you hear a click.

• Donotruntheentireunitunderthetap,onlythebladesetismeanttobe

submerged in water.

• Placeafewdropsofcutterorsewingmachineoilontotheblades.Wipeo

excess oil.

, EVERY SIX MONTHS

• At regular intervals the blade set should be removed and cleaned.

• Removethe2screwsretainingthexedbladewithascrewdriver.Donot

remove the blade set.

• Brushouthairsfrombetweenthebladeswithsoftcleaningbrush.Donot

remove the lubricating grease from the blades. It is not necessary to remove

the small moving blade from the unit.

• Ifthemovingbladehasbeenremovedthiscanbere-ttedbyslottingthe

coated blade holder over the pin in the centre of the interior product head.

• Thegrooveonthecoatedblade,justbelowtheteeth,restsonametalplate

at the opposite side to the screw holes. The xed blade is tted with the

raised prole pointing outwards and xed with the 2 screws.

• Ifthebladesarenotcorrectlyaligned,cuttingeciencywillbeimpaired.

• Placeafewdropsofcutterorsewingmachineoilontotheblades.Wipeo

excess oil.

, CLEANING CAUTIONS

• Ensure the appliance is switched o and unplugged from the mains before

cleaning.

• Onlytheattachmentguidecombsandtrimmerblademayberemovedfrom

the product for cleaning.

• Donotrinseunderwater.

• Donotuseharshorcorrosivecleanersontheunitsortheirblades.

BATTERY REMOVAL

• Theappliancemustbedisconnectedfromthesupplymainswhenremoving

the battery.

• Turnthetrimmeronanddischargeallremainingpower.

• Removethecombattachment.

• Detachthebladecartridge.

• Prythedecorativepanelothetophousingtoexposetheinternalsand

printed circuit board.

ENGLISH