Vitek VT-3503 [4/6] English русский

Vitek VT-3503 [4/6] English русский
11
После этого радио отключится. Но если не
отменить режим пробуждения, то на следующий
день он сработает.
5.7.Если вы хотите, чтобы радиоприемник продолжал
работать, установите переключатель в положение
“ON”. Чтобы проверить установленное время
пробуждения, нажмите на кнопку, и оно высветится
на дисплее.
6. ПРОБУЖДЕНИЕ С СИГНАЛОМ БУДИЛЬНИКА
6.1.Следуйте описанию пунктов 15 в разделе
“Пробуждение под музыку”.
6.2.Установите регулятор в положение “BUZZ/OFF”.
Сигнал будильника включится автоматически в
установленное время. Чтобы отключить сигнал
будильника, переведите переключатель в
положение “OFF”.
7. ФУНКЦИЯ КОРОТКОГО СНА
Если вы хотите подремать еще 9 минут, нажмите на
кнопку “SNOOZE” в режиме работы будильника. Через
9 мин молчания сигнал пробуждения повторится (либо
сигнал будильника, либо музыка).
8. ЗАСЫПАНИЕ И ПРОБУЖДЕНИЕ ПОД МУЗЫКУ
ИЛИ ПОД СИГНАЛ БУДИЛЬНИКА
8.1. Следуйте описанию пунктов в разделе 5
“Пробуждение под музыку” и в разделе 6
“Пробуждение с сигналом будильника”.
8.2. Нажмите на кнопку и установите нужный
промежуток времени для включения сигнала
будильника и радио.
6
9. BATTERY BACK UP
Note: The clock radio has a backup power system to
ensure continuous operation of the dock radio and alarm
in the event of a power failure. The switch from AC to bat
tery power is automatic. However under battery power the
clock display will not illuminate even through the clock will
maintain approx. the current time and will store the alarm
time in its memory. The system operates on a 9V battery
(not included) we recommended the use of a long life bat
tery to ensure maximum performance.
Note: This battery backup features is intended to retain
the clock time and memory functions during a power fail
ure for short periods. The clocks should not be left for long
periods of time without mains supply as the battery will
drain fairly quickly. Remove the battery if the unit is dis
connected from the mains.
Care: The cabinet can be dusted with soft cloth or if nec
essary cleaned with a soft cloth dampened with water. The
power plug should be disconnected before cleaning.
Never use polish, solvent, abrasives or strong detergents
on the cabinet since these can damage the finish.
SPECIFICATIONS
Frequency range FM1 6488 MHz
FM2 88108 MHz
Speaker impedance 8 Ohm
ENGLISH РУССКИЙ
3503-2.qxd 22.08.03 12:22 Page 8

Содержание