![Sony SLV-ED25TH [2/53] Precautions](/img/pdf.png)
Sony SLV-ED25TH [2/53] Precautions
![Sony SLV-ED25TH [2/53] Precautions](/views2/1029634/page2/bg2.png)
Introduction
2
WARNING
To prevent fire or shock hazard, do not expose
the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
The mains lead must only be changed at a
qualified service shop.
Precautions
Safety
• This unit operates on 110 – 240 V AC, 50/60
Hz. Check that the unit’s operating voltage
is identical with your local power supply.
• If anything falls into the cabinet, unplug the
unit and have it checked by qualified
personnel before operating it any further.
• The unit is not disconnected from the mains
as long as it is connected to the mains, even
if the unit itself has been turned off.
• Unplug the unit from the mains if you do
not intend to use it for an extended period of
time. To disconnect the lead, pull it out by
the plug, never by the lead.
Installing
• Allow adequate air circulation to prevent
internal heat buildup.
• Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation
slots.
• Do not install the unit near heat sources
such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration or shock.
• Do not install the unit in an inclined
position. It is designed to be operated in a
horizontal position only.
• Keep the unit and cassettes away from
equipment with strong magnets, such as
microwave ovens or large loudspeakers.
• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to
a warm location, moisture may condense
inside the VCR and cause damage to the
video head and tape. When you first install
the unit, or when you move it from a cold to
a warm location, wait for about four hours
before operating the unit.
Caution
Television programmes, films, video tapes and
other materials may be copyrighted.
Unauthorized recording of such material may
be contrary to the provisions of the copyright
laws. Also, use of this recorder with cable
television transmission may require
authorization from the cable television
transmitter and/or programme owner.
Compatible colour/TV systems
• This VCR is designed to record and play
back using the PAL (B/G, D/K and I),
MESECAM (B/G and D/K) and NTSC
colour systems. Recording of video sources
based on other colour systems cannot be
guaranteed.
• NTSC colour signals can only be recorded
through the line input.
Содержание
- Operating instructions 1
- Slv ed33me mj sg 1
- Slv ed33me mj sg slv ed25ps th slv ed15ps 1
- Video cassette recorder 1
- Caution 2
- Compatible colour tv systems 2
- Installing 2
- Introduction 2
- Precautions 2
- Safety 2
- Warning 2
- Additional information 3
- Additional operations 3
- Basic operations 3
- Getting started 3
- Table of contents 3
- Checking your model name 4
- Getting started 4
- Step 1 4
- Step 1 unpacking 4
- Unpacking 4
- Inserting the batteries 5
- Setting up the remote commander 5
- Step 2 5
- Step 2 setting up the remote commander 5
- Using the remote commander 5
- Additional connections 6
- Connecting the aerial 6
- Connecting the vcr 6
- Step 3 6
- Step 3 connecting the vcr 6
- Step 4 7
- Step 4 tuning your tv to the vcr 7
- Tuning your tv to the vcr 7
- Step 4 tuning your tv to the vcr continued 8
- Selecting a language 9
- Step 5 9
- Step 5 selecting a language 9
- Presetting all receivable channels using the one touch tuning function 10
- Presetting channels 10
- Step 6 10
- Step 6 presetting channels 10
- Before you start turn on the vcr and the tv set the tv to the video channel 11
- Getting started 11
- Presetting all receivable channels automatically 11
- Press m m to move the cursor b to normal catv then select norm 11
- Press m m to move the cursor b to system then select b g d k or i whichever is applicable in your area if system is set to the wrong position the sound will be distorted or noisy 11
- Press menu then press m m to move the cursor b to tuner preset and press ok 11
- To preset catv channels select catv 11
- All receivable channels are preset in numerical sequence when no more receivable channels can be found presetting stops and the picture from the lowest numbered channel is displayed on the tv screen 12
- Getting started 12
- Press m m to move the cursor b to auto preset then press ok 12
- Step 6 presetting channels continued 12
- Before you start turn on the vcr and the tv set the tv to the video channel 13
- Getting started 13
- Presetting channels manually 13
- Press m m to move the cursor b to normal catv then select norm 13
- Press menu then press m m to move the cursor b to tuner preset and press ok 13
- To move the cursor b to channel set 13
- To preset catv channels select catv 13
- B21 b69 14
- Catv tv distribution 14
- Channel coverage 14
- E2 e12 14
- E21 e69 14
- Getting started 14
- If the tv sound is distorted or noisy press m m to move the cursor b to system then select b g d k or i whichever is applicable in your area 14
- If you know the number of the channel you want press the programme number buttons for example for channel 5 first press 0 and then press 5 14
- Press ok 14
- Press prog to select the programme position 14
- Press repeatedly until the channel you want is displayed pressing goes back to the previous channels 14
- R1 r12 14
- R21 r69 14
- S1 s41 s01 s05 14
- Sa4 sa13 14
- Selected programme position 14
- Step 6 presetting channels continued 14
- System b g 14
- System d k 14
- System i 14
- The channels are scanned in the following order 14
- To allocate another channel to another programme position repeat steps 4 and 5 14
- After presetting channels you can disable unused programme positions the disabled positions will be skipped later when you press the prog buttons 15
- Disabling unwanted programme positions 15
- Getting started 15
- If the picture is not clear 15
- In step 5 on page 14 press programme number button 0 twice to display the number 0 beside channel set 15
- Normally the auto fine tuning aft function automatically tunes in channels clearly if however the picture is not clear you may also use the manual tuning function 15
- Note that the aft auto fine tuning setting switches to off 15
- Press menu then select tuner preset and press ok 15
- Press ok 15
- Press prog to select the programme number for which you cannot obtain a clear picture 15
- Press to get a clearer picture then press ok 15
- Select fine tuning 15
- The fine tuning meter appears 15
- Setting the clock 16
- Step 7 16
- Step 7 setting the clock 16
- Getting started 17
- Note the menu disappears automatically if you do not proceed for more than a few minutes 17
- Press ok to start the clock 17
- Set the year hour and minute in sequence using to flash the item to be set and m m to select the digits 17
- Tip to change the digits during setting press to return to the item to be changed and select the digits using m m 17
- Basic operations 18
- Insert a tape 18
- Playing a tape 18
- The vcr turns on and starts playing automatically if you insert a tape with its safety tab removed 18
- Turn on your tv and set it to the video channel 18
- Additional tasks 19
- Basic operations 19
- Press h play 19
- To play an ntsc recorded tape set ntsc pb in the set up menu according to the colour system of your tv for details see page 43 19
- To set the colour system if streaks appear during playback press color system on the vcr to conform to the system that the tape was recorded in normally the colour system is correctly set whenever the tape is inserted 19
- When the tape reaches the end it will rewind automatically 19
- Playing a tape continued 20
- To display the counter on the tv screen press display 20
- To use the time counter at the point on the tape that you want to find later press clear the counter in the display window resets to 0 00 00 search for the point afterwards by referring to the counter 20
- Turning on the vcr and tv and starting playback automatically trinitron tv synchro play 21
- Insert a tape with its safety tab in place 22
- Press prog to select the programme position you want to record 22
- Recording tv programmes 22
- Turn on your tv and set it to the video channel 22
- Ep provides recording time three times as long as sp however sp produces better picture and sound quality 24
- For tape speed select sp or ep in step 4 24
- Recording tv programmes continued 24
- To record ntsc colour system programmes ntsc colour signals can be recorded through the line input line 1 in only display l in the display window using input select or prog in step 3 24
- When playing back the vcr automatically detects the tape speed 24
- Recording tv programmes using the easy timer function 25
- Setting the easy timer 25
- Recording tv programmes using the easy timer function continued 26
- Setting or changing the easy clock 27
- If you make a mistake re enter the correct digits before pressing easy timer 28
- Indicator appears in the display window 28
- Press the easy timer knob to confirm the clock setting 28
- Recording tv programmes using the easy timer function continued 28
- The vcr enters the timer recording setting mode 28
- To continue the easy timer setting go to step 2 in setting the easy timer on page 25 28
- To quit the easy timer setting mode without changing any settings press the easy timer knob repeatedly until the 28
- To set the clock to 8 20 press 0 8 easy timer 2 0 and easy timer in sequence to set the start or stop time to 8 20 press 0 8 2 0 and easy timer in sequence 28
- To set the timer and clock setting using the remote commander you can also use the remote commander to set the easy timer and easy clock the operations on the vcr and the remote commander correspond as follows 28
- You can also use the programme number buttons to set the clock start and stop times and the programme you want to record just press the programme number buttons to enter the hours and minutes for example 28
- Recording tv programmes using the easy timer function continued 30
- Basic operations 31
- Before you start check that the vcr clock is set to the correct time insert a tape with its safety tab in place make sure the tape is longer than the total recording time turn on your tv and set it to the video channel 31
- Press menu and select timer set check then press ok 31
- Press to flash each item in turn 2 press m m to set each item to correct a setting press to return to that setting and reset 31
- Set the date start and stop times programme position and tape speed 31
- Setting the timer manually 31
- You can preset up to eight programmes at a time 31
- Setting the timer manually continued 32
- Additional operations 33
- Playing searching at various speeds 33
- To resume normal playback press h play 33
- Setting the recording duration time 34
- Before you start turn on your tv and set it to the video channel 35
- Checking changing cancelling timer settings 35
- If you do not need to change the settings press ok then turn off the vcr to return to recording standby 35
- If you want to change or cancel a setting go on to the next step 35
- Press 1 to turn on the vcr 35
- Press menu then select timer set check 35
- Checking changing cancelling timer settings continued 36
- If you record a programme using the easy timer function you can easily find the beginning of the recording with this search function the search indicator flashes when the vcr finishes the easy timer recording 37
- Press the easy timer knob 37
- Searching the beginning of an easy timer recorded programme 37
- The vcr turns on rewinds to the beginning of the recorded programme and starts playback automatically 37
- Searching using the index function 38
- Using the index search buttons on the remote commander 38
- Using the search button and easy timer knob on the vcr 39
- Searching using the time search function 40
- About the adaptive picture control apc function 41
- Adjusting the picture 41
- Adjusting the tracking 41
- Adjusting the picture continued 42
- Changing menu options 43
- Menu choices initial settings are indicated in bold print 43
- Press m m to select the option to change then press to change the setting 43
- Press menu then select set up menu 43
- Press ok to return to the original screen 43
- Editing with another vcr 44
- How to connect to record on this vcr 44
- Before you start editing turn on your tv and set it to the video channel press input select or prog to display l in the display window press sp lp sp ep to select the tape speed sp or lp for the pal system and sp or ep for the ntsc system 45
- Insert a source tape with its safety tab removed into the other playback vcr search for the point to start playback and set it to playback pause 45
- Insert a tape with its safety tab in place into this recording vcr search for the point to start recording and press x pause 45
- Operation when recording on this vcr 45
- Press z rec on this vcr and set it to recording pause 45
- To start editing press the x pause buttons on both vcrs at the same time 45
- To stop editing press the x stop buttons on both vcrs 45
- Additional information 46
- Troubleshooting 46
- Others 47
- Be sure to use the sony t 25cld t 25clw or e 25cldr video head cleaning cassette if these cleaning cassettes are not available in your area have the heads cleaned at your nearest sony service facility a standard service charge will be required 48
- Head condition sensor 48
- Sapphire tape cleaner 48
- Symptoms caused by contaminated video heads 48
- The head condition sensor checks the video heads condition if the heads are dirty a message will instruct you to insert a video head cleaning cassette 48
- The unit incorporates a sapphire tape cleaner which cleans a video tape when it is loaded this cleaner can prevent the video heads from contamination by removing dust or mold from a tape with the sapphire edge 48
- Troubleshooting continued 48
- Additional information 49
- General 49
- Inputs and outputs 49
- Specifications 49
- Supplied accessories 49
- System 49
- 3 45 2 6 7 50
- Front panel 50
- Index to parts and controls 50
- Display window 51
- Rear panel 51
- Index to parts and controls continued 52
- Remote commander 52
- T u v w x y z 53
Похожие устройства
- Makita BO 4561 Инструкция по эксплуатации
- Samsung WF1702YQR Инструкция по эксплуатации
- Rolsen C29SR157TI2 Инструкция по эксплуатации
- Nokia ВН-109 Grey Инструкция по эксплуатации
- Sony SLV-ED25PS Инструкция по эксплуатации
- Samsung WF0602WKV Инструкция по эксплуатации
- Makita BO 5020 Инструкция по эксплуатации
- Levenhuk Rainbow 50L NG Orange Апельсин Инструкция по эксплуатации
- Olympus C-2000 Zoom Инструкция по эксплуатации
- Nokia ВН-214 Grey Инструкция по эксплуатации
- Sony SLV-ED225PS Инструкция по эксплуатации
- Samsung WF1802WEUS Инструкция по эксплуатации
- Levenhuk Rainbow 50L NG LimeЛайм Инструкция по эксплуатации
- Makita BO 4565 Инструкция по эксплуатации
- Vitek VT-1702 Инструкция по эксплуатации
- Nokia ВН-217 Grey Инструкция по эксплуатации
- Sony SLV-ED215PS Инструкция по эксплуатации
- Samsung WFE590NMS Инструкция по эксплуатации
- Makita 9036 Инструкция по эксплуатации
- Levenhuk Rainbow 50L NG AmethystАметист Инструкция по эксплуатации