Marta MT-2428 [4/9] Using appliance

CAUTIONS FOR OPERATION

Never use the unit in places which are not flat and unstable.

Do not insert and pull out the plug by wet hands, as this may cause electrical shock.

Power supply capacity should be enough.

The oil heater must always operate in vertical position.

Never use the unit in place which is not flat, make sure there are no flammable or easy deformed objects within 1m.

The heater is suitable for operation on an A. C. electricity supply having the same voltage as that shown on its rating label.

The unit should be earthed. Do not cover the appliance.

Insert the plug to the wall outlet after setting the thermostat to the “MIN” position and setting the power switch to the “OFF” position.

Turn the power switch to the “HIGH” position, then turn the thermostat to the “HIGH” position, at this moment the unit begins working, when the temperature rises to what

you are satisfied with, slowly turn the thermostat counter clockwise until the indicator light is out, and the room temperature thus can be kept constant. If you want to raise

or lower the room temperature, you can make another regulation: Turn the thermostat clockwise to raise the temperature, or counter-clockwise to lower it and you can

also set the power switch to position I, II or III for different power selecting.

 Position I – Minimum power (1000 W)

 Position II – Medium power (1300 W)

After use, switch off the keys for power setting first, then turn the thermostat to the “OFF” position, and pull out the power supply plug.