Korting KHA 4970 X Cylinder Руководство пользователя онлайн [9/42] 255505

- 9 -

flashes. To interrupt it before the 10 minutes have expired

press key E again.

• By pressing key F for two seconds (with the hood

switched off) the “clean air” function is activated. This

function switches the appliance on for ten minutes every

hour at the first speed. As soon as this function is acti-

vated the motor starts up at the first speed for ten

minutes, During this time key F and key C must flash at

the same time.

After ten minutes the motor switches off and the LED of

key F remains switched on with a fixed light until the

motor starts up again at the first speed after fifty min-

utes and keys F and C start to flash again for ten min-

utes and so on.

By pressing any key for the exclusion of the hood light

the hood will return immediately to its normal functioning

(e.g. if key D is pressed the “clean air” function is deac-

tivated and the motor moves to the 2nd speed straight

away. By pressing key B the function is deactivated).

(*) The “automatic stop timer” delays stopping of the

hood, which will continue functioning for 15 minutes at

the operating speed set at the time this function is

activated.

• Active carbon/grease filter saturation:

- When button A flashes at a frequency of 2 seconds,

the grease filters must be cleaned.

- When button A flashes at a frequency of 0.5 seconds,

the carbon filters must be replaced.

After the clean filter has been replaced, the electronic

memory must be reset by pressing button A for

approximately 5 seconds, until the light on the button

stops flashing.

THE MANUFACTURER DECLINES ALL

RESPONSIBILITY FOR EVENTUAL DAMAGES

CAUSED BY BREACHING THE ABOVE WARNINGS.