Makita GA7040SF01 [4/48] Specifications
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Makita GA7040SF01 [4/48] Specifications

Makita GA7040SF01 [4/48] Specifications
4
ENGLISH
Explanation of general view
1-1. Shaft lock
2-1. Motor housing
2-2. Lock button
2-3. Handle
3-1. Switch trigger
3-2. Lock lever
5-1. Wheel guard
5-2. Screw
5-3. Bearing box
6-1. Bearing box
6-2. Wheel guard
6-3. Nut
6-4. Lever
7-1. Nut
8-1. Lock nut
8-2. Depressed center wheel
8-3. Super flange
8-4. Inner flange
9-1. Lock nut
9-2. Depressed center wheel
9-3. Inner flange
10-1. Lock nut wrench
10-2. Shaft lock
11-1. Lock nut
11-2. Outer flange 78
11-3. Cut-off wheel
11-4. Inner flange 78
11-5. Dust collecting wheel guard
13-1. Exhaust vent
13-2. Inhalation vent
14-1. Commutator
14-2. Insulating tip
14-3. Carbon brush
15-1. Brush holder cap
15-2. Screwdriver
SPECIFICATIONS
Model
GA7030/GA7030F
GA7030S/GA7030SF
GA7040S/GA7040SF
GA9030/GA9030F
GA9030S/GA9030SF
GA9040S/GA9040SF
Depressed center wheel diameter
180 mm 230 mm
Spindle thread M14 M14
No load speed (min
-1
) 8,500 6,600
Overall length 511 mm 511 mm
Net weight 5.1 kg 5.5 kg 5.1 kg 5.5 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
END202-2
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Wear safety glasses.
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
ENF100-1
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.23 Ohms it can be
presumed that there will be no negative effects. The
mains socket used for this device must be protected with
a fuse or protective circuit breaker having slow tripping
characteristics.
For Model
GA7030,GA7030F,GA7030S,GA7030SF,GA9040S,GA
9040
ENG021-1
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 89 dB (A)
sound power level: 102 dB (A)

Содержание

Похожие устройства

Скачать