Timberk THU UL 24E (WB) [6/24] Cleaning and maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Timberk THU UL 24E (WB) [6/24] Cleaning and maintenance

Timberk THU UL 24E (WB) [6/24] Cleaning and maintenance
www.timberk.com • electric humidifi er
6
IMPORTANT!
To avoid deformation or wear of working surfaces,
resulting in decreased atomizing or other malfunctions, do
not use metallic brushes, blades or talc powder to wipe
the atomizer’s surface. The water tank may leak upon
heavy impacts. In case of water leakage, immediately
stop using the unit and contact a service center. To keep
the unit dry, remove water after cleaning and make sure
to dry the unit’s case. Make sure that there is no water left
inside the unit’s case. Prior to a long break in using the
unit, dry its surface and pack it into a plastic bag, then
put it into a box. Store the unit in a low-humidity room.
Storing the unit undried results in generation of mold
8. CLEANING AND MAINTENANCE
Before cleaning the device make sure that the plug is disconnected from
the wall outlet. Otherwise, it may result in electric shock. Before cleaning,
wait until the cooling water in the ground, so as not to burn your hands.
Spend device cleaning once or twice a week. To clean the outer surface of
the unit with a damp soft cloth. To avoid electric shock, do not scratch or
damage the device while cleaning elements.
Do not use when cleaning the device thinner, benzene, dimethyl benzene,
stiff brush, talcum powder and other materials, except water.
Wipe any remaining water inside the base with a damp, soft cloth.
To remove the remaining water in the small details, you can use a soft
brush, then wipe it again with a soft cloth.
In the formation of dirt on the membrane, clean it with a soft brushes. Use
a soft brush to erase the remnants of water on the surface of the device,
and then wipe it again with a soft cloth. Rinse water tank and a clean water
dispenser.
After removal of the residual water from the surface of the sprayer, wipe it
with a soft cloth. Clean the outside surface with a damp, soft cloth.
Timer to turn off the device
To set the timer to turn off the device, press the «timer» button
On the control panel several times, while the set timer time before the
device is turned off will be re ected on the display.
Night mode
In this mode, the brightness of the display is automatically reduced. To
activate «SLEEP» mode, press and hold the LED light button on the control
panel for 3 second sand the display will go out. To turn off this mode,
«Press the LED light» button on the control panel again, while the «SLEEP»
mode will turn off.
The humidi er is equipped with color illumination
When you turn on the backlight, the different colors will change in turn.
To turn on the color light, press color light, press the LED light button. To
turn off the color light, press the button again on/off button amend to LED
light button.
Automatic shut-off in the absence of water
If the water level in the tank drops below the minimum allowable value,
the ultrasonic membrane of the device will automatically turn off and a red
indicator will light up on the control panel with 3 buzzing sound.
Aromatization
The device is equipped with an aroma capsule. When you add aromatic oil
to it, air is aromatized. Aromatic oil is not included in the scope of supply.
Switching off the device
To turn off the device, press the «ON / OFF» button and unplug the
appliance from the mains.

Содержание

Похожие устройства

Скачать