Makita UT1600 Инструкция по эксплуатации онлайн [6/44] 257179

Care and Maintenance

Repairs shall only be carried out by qualified staff trained and experienced in this

area. The tool shall be inspected by a skilled electrician after every repair. The

power tool is designed to require only a minimum of maintenance and care.

However, the following work shall be carried out and/or the following parts shall

be inspected regularly:

• Do always keep the power tool and the ventilation slots clean.

• Make sure that no foreign objects get into the power tool.

• If the tool breaks down, the repair shall only be carried out by an authorised

shop.

Information on noise and vibration

Measured values determined according to EN 60745

The A-weighted noise level of the tool is typically:

UT 1401

UT 1600

110 V ~ 230 V ~

Sound pressure level (L

) 86 dB(A) 85 dB(A) 87 dB(A)

Sound power level (L

) 97 dB(A) 96 dB(A) 98 dB(A)

Uncertainty K 3 dB 3 dB

Wear ear protection!

UT 1401

UT 1600

110 V ~ 230 V ~

Hand-arm vibration 0,5 m/s² 0,75 m/s² 1,03 m/s²

Uncertainty K 1,5 m/s² 1,5 m/s²

Measured values determined according to EN 60745

The vibration emission level indicated in these instructions has been measured in

accordance with a standardised test method given in EN 60745 and can be used

to compare one tool with another. It is also suitable for a preliminary evaluation of

the vibration emission level.

The vibration emission level set out in these instructions presents the main

applications of the power tool. If the power tool is used for other applications or

with different tools or if maintenance is not sufficient, the vibration emission level

may vary. This may lead to a significantly higher vibration emission level during

the whole working period.

In order to be accurate, an estimation of the level of exposure to vibration should

also take into account the times when the tool is switched off and when it is

running but not actually used. This may significantly reduce the level of exposure

to vibration during the whole working period.

Additional protective measures in order to protect the operator from vibration

effects, e.g. maintenance of power tools and tools, keeping hands warm,

organisation of work processes, shall be determined.