Соэкс Импульс Инструкция по эксплуатации онлайн [41/52] 258441

● EMF in LIVE AREA

Set the "EMF in LIVE AREA" mode

Bring the instrument into the monitored area, holding it with your

fingers at arm's length at a height of 1–2 meters above the ground or other

surface. Keep instrument in the monitored area not less than 10 seconds prior

to reading out the result. Measures should be taken in case of appearance of

"HIGH LEVEL OF ELECTRIC FIELD" or "HIGH LEVEL OF

MAGNETIC FIELD" messages on the red background.

The possible reasons for threshold crossing are: proximity of

power cable, wiring defect, proximity to the electric devices (e. g. elevator

motors), proximity to the base stations, crossing of the tracks of radio relay

stations, proximity to the power lines, etc. Long stay of people and domestic

animals in such areas should be avoided; in case of significant excess staying

there may result in electrical shock.

● EMF of PC

Set the "EMF of PC" mode

Take measurement according to the procedure specified in

Appendix 3.

Measurement time in this case should be not less than 30 seconds.

For the purpose of reducing electromagnetic field distortion generated by

human, it is advisable to fix the instrument on an electrically neutral stand, e.

g. plastic chair, for the time of measurement.

● Localization of hidden electric wiring

The instrument can be used for the localization of a hidden

electric wiring in walls or furniture.

To do this, it is convenient to use graphic electric and magnetic

field level indicators, displaying not average but instant value of the

corresponding field parameter.

Select the required range for instant field level display by an

experimentation. If the field is weak, use «EMF of PC» mode; if the signal

exceeds the display range, use other modes.

-41-