Scarlett SC-1159 [3/7] Assembling

ASSEMBLING

· Do not operate the oil heater without the base support fixed correctly.

· To fix the rear support base, fit it tightly against the fin, until it stays in

place (as.).

· To fix the front support base, fit it tightly against the bottom on the front

panel (as.).

· After fixing the supports, confirm that the heater is stable on the floor.

USING THE APPLIANCE

· Set the thermostat to the minimal position and power switch to the  position, insert

the plug to the power supply.

THERMOSTAT

· The thermostat will automatically maintain your desired room temperature.

· Set the power switch to the  position.

· Turn the thermostat control clockwise all the way round until you hear a click, this sound

indicates that the oil heater is activated, the pilot light is ON. Continue turning the thermostat

control clockwise to its highest setting.

· When the pilot light is ON, the heater is activated. This light turns ON and OFF repeatedly by

order of the thermostat.

· Turning the thermostat clockwise will always increase the set temperature; turning it

anticlockwise will decrease the set temperature. The thermostat will automatically turn the

heater on and off.

NOTE:

· The room must be sealed in good condition, if not, it will not make good result because of

the influx of heat.

· After use, turn the thermostat to the minimal position and set the power switch to the 

position and unplug from power supply.

MAINTENANCE AND CARE

· The oil heater should be cleaned regularly to wipe out the dust on the surface of fins. As this

may result the radiating efficient.

· Unplug from the power supply and allow the appliance to cool down.

· Wipe out with a soft damp cloth. Do not use detergent or abrasives.

· Do not scrap the surfaces of fins with sharp hard tools, to avoid surfaces getting rusty,

because of damage of the paint coat.

STORAGE

· Ensure the oil heater is completely cool.

· Roll up the power cord in the supports when the heater is not in

use.

· Store the appliance in a cool, dry place.