Unit USI-192 [3/10] Operation of device

Operation of device.

1. Hold the iron vertically, with a slight slope, fill the tank with water, using a measuring cup. You

had better use purified water with less calcium particles. Water is not to exceed “Max” level on

the tank (See pic 1).

2. Close the lid of the water tank until it clicks.

3. Connect the iron to the mains and set the thermostat the desired temperature of heating,

depending on the type of fabric (See pic 2). The indicator light will illuminate.

Pic 1 Pic 2

4. Make sure steam button is on dry position. (See pic 3), then place the iron vertically (See pic 4).

Pic 3 Pic 4

5. Once the sole is heated to a predetermined temperature indicator light goes out. Then set the

steam regulator to the desired position for steam ironing or dry ironing.

WARNING: Do not touch the hot soleplate, this may result in burns!

6. Press spraying water button a couple of times to moisten the laundry if necessary, before