Unit USI-280 [3/10] Operation of device

Operation of device.

1. Hold the iron vertically, with a slight slope, fill the tank with water, using a measuring cup. You had

better use purified water with less calcium particles. Water is not to exceed “Max” level on the tank (See

pic 1).

2. Close the lid of the water tank until it clicks.

3. Connect the iron to the mains and set the thermostat the desired temperature of heating, depending on the

type of fabric (See pic 2). The indicator light will illuminate.

5. Once the sole is heated to a predetermined temperature indicator light goes out. Then set the steam

regulator to the desired position for steam ironing or dry ironing.

WARNING: Not touch hot soleplate at any time before cooling down!