Unit USI-286 [6/20] Shot of steam

User manual | Руководство пользователя | Iron | Утюг | USI-286/287

Steam ironing

1. Fill the tank with water as described in «Filling the water tank.»

2. Connect the iron to the electrical grid.

3. Steam ironing is possible only when the maximum heating temperature of the

sole. Otherwise, no formation of steam and the water can ﬂow through the sole.

4. Wait until the indicator light turns off, it indicates that there has been a selected

temperature.

5. Set the steam supply to the desired position.

6. At the end of the work and during breaks in ironing things set the iron in vertical

position.

7. After completing unplug the iron, pour the remaining water in it, and put to cool.

Spray

1. The spray can be used in any position, either in dry or steam ironing, as long as

the water tank is ﬁlled with water.

2. Press the spray button for this function.

NOTE: This button has to be pressed repetitively to start this function for the ﬁrst

time.

Shot of steam

Shot of steam give extra steam for removing persistent wrinkles.

1. Place the temperature selector at the “max” position and wait until the pilot light

goes out

2. Wait for a few seconds for the steam to penetrate the ﬁbre before pressing again.

3. NOTE: For the best steam quality, do not use more than three successive bursts

each time. Several pumping actions are needed to start this function.

4. Excessive use of this feature will cause the iron to cool, ensure that the pilot light

is out, before operating the shot of steam control