Sony VPL-CX276 [15/55] Correcting the image twist warp correction feature

Projecting an Image

Projecting/Adjusting an Image

When the projected image a trapezoid, tapering to the right or left

1 Press KEYSTONE on the remote

commander twice or select H Keystone in

the INSTALL SETTING menu.

2 Use V/v/B/b to set the value. The higher

the setting, the narrower the right part of

the projected image. The lower the setting,

the narrower the left part.

Press the RESET key to restore the projected image before adjustment.

• Since the Keystone adjustment is an electronic correction, the image may be deteriorated.

• Depending on the position adjusted with the lens shift feature, the aspect ratio of the image may

change from the original or projected image may be distorted with Keystone adjustment.

Correcting the image twist (Warp correction feature)

You can correct the image twist by the warp correction feature

1 Press KEYSTONE on the remote

commander three times, or select

“Warping” in the INSTALL SETTING

menu, and select “Adjust.”

2 The guide is displayed.

The corners of the image to be corrected

1 Move the s by using V/v/B/b to select

the corner you want to correct.

If you press ENTER, you will go back to

the cursor display.

2 Adjust the position of the corner you want

to correct by using V/v/B/b.

Notes

Increase the number

towards minus

Increase the number

towards plus

Adjust using this cursor.