![Pioneer VSX-920K Инструкция по эксплуатации онлайн [79/400] 2748](/img/pdf.png)
Pioneer VSX-920K Инструкция по эксплуатации онлайн [79/400] 2748
![Pioneer VSX-920K Инструкция по эксплуатации онлайн [79/400] 2748](/views2/1003088/page79/bg4f.png)
Controlling the rest of your system 09
79
En
English
Français
Deutsch
Nederlands
Italiano
Español
3 Point the two remote controls towards
each other, then press the button that will be
doing the learning on this receiver’s remote
control.
The LED blinks once and flashes continuously.
• The remote controls should be 3 cm apart.
4 Press the corresponding button on the
other remote control that is sending (teaching)
the signal to this receiver’s remote control.
If the LED lights for one second, the setting has
been successfully completed.
1
5 To program additional signals for the
current component repeat steps 3 and 4.
To program signals for another component,
exit and repeat steps 2 through 4.
6 Press
R.SETUP
to exit the programming
mode.
Erasing one of the remote
control button settings
This erases one of the buttons you have
programmed and restores the button to the
factory default.
1 Press and hold
R.SETUP
, then press “7”
for three seconds.
The LED flashes continuously.
• To cancel the preset setup mode press
R.SETUP.
2 Press the input function button
corresponding to the command to be erased,
then press
ENTER
.
The LED flashes once.
3 Press and hold the button to be erased
for three seconds.
If the LED lights for one second, the erasing
has been successfully completed.
4 Repeat step 3 to erase other buttons.
5Press
R.SETUP
to exit the erasing mode.
Note
1 • Note that interference from TVs or other devices will sometimes result in the remote control learning the wrong
signal.
• Some commands from other remote controls cannot be learned, but in most cases the remotes just need to be
moved closer together or farther apart.
• If the LED flashes for five seconds, it means the memory is full. See Resetting the input assignment of one of the
input function buttons above to erase a programmed button you’re not using to free up more memory (note that some
signals may take more memory than others).
3 cm
This receiver’s
remote control
Other remote
control
VSX-1020_SYXCN.book 79 ページ ２０１０年３月１２日 金曜日 午前９時１０分
Содержание
- Contents 4
- Adjusting the sound and picture quality as desired 7
- Basic playback page 44 7
- Before you start 7
- Changing the osd display language osd language page 39 7
- Connecting the components 7
- Connecting the speakers 7
- Determining the speakers application page 17 7
- Flow of settings on the receiver 7
- Making maximum use of the remote control 7
- Mcacc speaker settings 7
- Other optional adjustments and settings 7
- Power on 7
- The input setup menu page 42 7
- Before you start 8
- Caution 8
- Checking what s in the box 8
- Installing the receiver 8
- Loading the batteries 8
- Character display 9
- Controls and displays 9
- Front panel 9
- Indicators 9
- Input selector dial 9
- Multi zone controls 9
- Remote sensor 9
- Speakers 9
- U standby on 9
- Ipod iphone direct control 10
- Ipod iphone usb terminals 10
- Listening mode buttons 10
- Master volume dial 10
- Mcacc setup mic jack 10
- Phones jack 10
- Tuner controls 10
- Vsx 1020 vsx 1025 only hdmi input connector 10
- Vsx 920 only video 2 input terminals 10
- Digital format indicators 11
- Display 11
- Listening mode indicators 11
- Multi zone 11
- Phase control 11
- Program format indicators 11
- S rtrv 11
- Signal indicators 11
- Analog signal indicators 12
- Character display 12
- Input function indicators 12
- Master volume level 12
- Matrix decoding format indicators 12
- Remote control mode indicator 12
- Scroll indicators 12
- Speaker indicators 12
- Tuner indicators 12
- Input function buttons 13
- Multi operation use to perform multi operations page 81 13
- Receiver controls 13
- Remote control 13
- Tv control buttons 13
- U receiver 13
- Zone 2 13
- I j k l enter 14
- Listening mode controls 14
- Master volume 14
- Operating range of remote control unit 14
- Receiver controls 14
- Remote control led 14
- Tv ctrl 14
- Connecting your equipment 15
- Important 15
- Rear panel 15
- Caution 16
- Important 16
- A 9 channel surround system front height 17
- B 9 channel surround system front wide 17
- C 7 channel surround system speaker b connection 17
- Determining the speakers application 17
- D 5 channel surround system front bi amping connection high quality surround 18
- E 5 channel surround system zone 2 connection multi zone 18
- Important 18
- Other speaker connections 18
- Placing the speakers 19
- Some tips for improving sound quality 19
- Bare wire connections 20
- Caution 20
- Connecting the speakers 20
- Loosen terminal and insert exposed wire 20
- Push open the tabs and insert exposed wire 20
- Release the tabs 20
- Tighten terminal 20
- Twist exposed wire strands together 20
Похожие устройства
- Behringer MIX 800 MINIMIX Инструкция по эксплуатации
- Astralux 650 (mini) Инструкция по эксплуатации
- Miele FN 4957 S ed-1 Инструкция по эксплуатации
- Asus SDRW-08D1S-U White Инструкция по эксплуатации
- Dremel 300SJ F0130300SJ Инструкция по эксплуатации
- Pioneer VSX-420K Инструкция по эксплуатации
- Behringer PB1000 PEDAL BOARD Инструкция по эксплуатации
- Astralux 9710 Инструкция по эксплуатации
- Miele F 9252 i Инструкция по эксплуатации
- Dremel Big On Detail Drem F0130300LS Инструкция по эксплуатации
- Asus SDRW-08D1S Инструкция по эксплуатации
- Sony STR-DH510 Инструкция по эксплуатации
- Hyundai ix55 Veracruz Инструкция по эксплуатации
- Dremel 300 JC (25 насадок) F0130300JC Инструкция по эксплуатации
- Astralux 690 Инструкция по эксплуатации
- Miele F 9212 i Инструкция по эксплуатации
- Asus 08D2S-U Black Инструкция по эксплуатации
- Hyundai ix35 Инструкция по эксплуатации
- Behringer PB600 PEDAL BOARD Инструкция по эксплуатации
- Dremel 300-1/55 F0130300JF Инструкция по эксплуатации
Скачать
Случайные обсуждения