Tcl LED43D2900 [7/31] Chapter 2 general operation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Tcl LED43D2900 [7/31] Chapter 2 general operation

Tcl LED43D2900 [7/31] Chapter 2 general operation

Содержание

Похожие устройства

Chapter 2 General Operation Switching on Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the channel set up procedure 1 Insert two AAA batteries in the remote control Precautions on using batteries Only use the battery types specified Make sure you use the correct polarity Do not mix new and used batteries Do not use rechargeable batteries Do not expose batteries to excessive heat such as sunshine fire or the like throw them in a fire recharge them or try to open them as this could cause them to leak or explode Remove the batteries from the remote control if you are not using it for a long period of time 2 Connect the power cable FIRST to the television THEN to a mains socket Your TV set should only be connected to an AC supply It must not be connected to a DC supply If the plug is detached from the cable do not under any circumstances connect it to a mains socket as there is a risk of electric shock Note the figures are for representation only The location of the power socket at the back of the television might differ depending on the model 3 Connect an outside aerial to the ANTENNA IN socket at the back of the TV set The aerial socket 75 OHM VHFI UHF cable can be used for connecting an external aerial or other equipment fitted 4 When powered on the TV will be turned on directly or be in standby mode If the TV set is in standby mode press the O button on the remote control or on the TV set to turn on the TV Switching off To put the TV set into standby mode press the 0 button on the remote control or on the TV the TV set remains powered up but with low energy consumption To switch off the TV set unplug the mains socket from the mains outlet 7

Скачать