Tenda 4G630 [49/89] Access control

III Features & Configurations | Tenda

Device PIN: Displays the device’s PIN code.

Start PIN: If you enter the client’s PIN code on the router, clicking this button

starts the PIN connection.

Operation Instructions:

PBC: If you press the hardware WPS button on the device for 1 second, the

WPS LED will blink for about 2 minutes, indicating that the PBC encryption

method is successfully enabled. During this time, an authentication routine can

be performed between your device and a WPS/PBC capable wireless client.

Simply enable the WPS/PBC on the client wireless device. If it passes the

authentication, the wireless client device connects to your device and the WPS

LED turns off. Repeat the steps above if you want to add more wireless client

devices to your device.

PIN: To use this option, you must know the PIN code from the wireless client

and enter it in the corresponding field on your device while using the same PIN

code on the client side for this connection.

Note

① To use the WPS encryption, the wireless client device must also be

WPS-capable.

② The WPS becomes unavailable if you select any of the following option:

Open, Shared, WPA2-PSK plus TKIP, and Mixed WPA/WPA2-PSK plus

TKIP.

3.3 Access Control

Specify a list of devices to "Allow" or "Deny" a connection to your wireless

network via the devices’ MAC Addresses.

Click Wireless -> Access Control to enter the configuration screen. Three

options are available: Disable, Deny and Allow.

A. If you want to allow all wireless clients to join your wireless network, select

Disable.