Tenda pw201a+p200 Инструкция по эксплуатации онлайн [69/78] 264645

PW201A Wireless N Powerline AP User Guide

1. Press the Pair button on PW201A-2 for 1-3 seconds and then

release it. When the PLC LED on the PW201A-2 starts blinking, it indicates

this PW201A-2 is searching for available networks.

2. Within 2 minutes upon releasing PW201A-2’s Pair button, press the

Pair button on either P200 or PW201A-1 to start pairing.

3. Observe all Powerline device’s LED status. When the Power LED

displays a solid light and the PLC LED concurrently blinks rapidly, it

indicates the PW201A-2 has been successfully connected to the existing

Network 1.

To disconnect a Powerline device from the existing Powerline network,

do as follows:

As mentioned above, one P200 and two PW201A devices have

interconnected on a private Powerline network. If you want to disconnect

PW201A-1 from the network, press the Pair button on PW201A-1 for over 6

seconds and then release it. When the Power LED on the PW201A-1 goes

off, it indicates the PW201A-1 has left Network 1.