Marta MT-2686 [7/30] Mt 2686

MT-2686

OPERATION INSTRUCTION

 Remove the nozzle (1) from the water tank (2).

 Remove the water tank (2) from unit.

 Turn over the tank (2); unscrew the lid (3), by turning it anti clockwise.

 Hold the touch sensor button (4) for two seconds again to switch off the unit and then unplug it. Fill the tank (2) with water and set the filled tank on the body of the unit.

 Display (5) shows current room temperature while the appliance is running. When timer set, display shows timer setting.

 You can set the device to run within a target period of time from 1 to 12 hours. Set target value of timer by serial touch of the Timer button (6).

CLEANING AND MAINTENANCE

ATTENTION! Always switch off and unplug the unit before cleaning.

You can ensure many years of trouble free operation of your humidifier by following a few simple maintenance procedures. If your water is hard, containing high concentrations of calcium and other minerals,

then over a period of time white dust will start to deposit on the various surfaces in the room. A white, film-like substance will also start to develop in the water basin, on the transducer and on the inner surface

of the water tank. This white film will impede the proper function of the transducer and the operation of the machine.

Put 5-10 drops of cleaning abluent on the surface of the transducer; wait for 2-5 minutes.

Brush off the scale from the surface.

Rinse the transducer with clean water.

Never use sharp or solid objects for cleaning the transducer

How to clean the basin unit:

Clean the water basin with soft cloth. If there is excess film on the surfaces, then soak the cloth with vinegar and repeat the process.

If there is a film in any of the depressions along the basin, drop a bit of vinegar into depression and clean it out with a brush.

Rinse the water basin with clean water.

STORAGE

If you are not going to use the humidifier for a long time, make sure that all its parts are dry, including the operating chamber of the sprayer.