Motorola MBP140-2 [16/23] Troubleshooting

16 Troubleshooting

6. Troubleshooting

Power/link Indicator on the parent unit does not come on

• The baby unit may be switched off. Press the

button to switch on the baby unit.

• Check whether the supplied battery pack is correctly installed and that it is

not drained.

• Recharge the parent unit by placing it in a charger cradle connected to the

mains.

Power Indicator on the baby unit flashes

• The baby unit may be switched off. Press the

button to switch on the baby unit.

• The parent unit and the baby unit may be out of range with each other.

Reduce the distance between the units, but not closer than 1.5m.

The parent unit beeps

• The parent unit may have lost connection with the monitoring baby unit.

Reduce the distance between the parent unit and the baby unit, but not

closer than 1.5m.

• The baby unit may be switched off. Press the

button to switch on the baby unit.

• Battery pack in parent unit is running low. Place the parent unit in a charger

cradle connected to mains power for recharging.

Cannot hear sound or baby cry from the parent unit

• The volume level in the parent unit may be set too low. Increase the volume

level of the parent unit. Refer to section 3.4 for volume level settings

• The parent unit and the monitoring baby unit may be out of range with each

other. Reduce the distance between the units, but not closer than 1.5m.

The baby monitor system produces a high-pitched noise

• The parent unit and the baby unit are too close to each other. Make sure the

parent unit and baby unit are at least 1.5m away from each other.

• The speaker volume of the parent unit maybe set too high. Decrease the

volume of the parent unit.

Battery pack in the parent unit is running low quickly

• The volume level of the parent unit may be set too high which consumes

power. Decrease the volume level of the parent unit. Refer to section 3.4 for

volume level settings.