Liebherr GWTes 4677 [3/7] Connecting to the mains
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Liebherr GWTes 4677 [3/7] Connecting to the mains

Liebherr GWTes 4677 [3/7] Connecting to the mains
9
GB
Setting up
• Avoid positioning the appliance in direct sunlight or near cookers,
radiators and similar sources of heat.
• The floor on which the appliance stands should be horizontal and
level. To compensate for any unevenness, adjust the height of the
feet with the open-ended wrench supplied.
• Standard EN 378 specifies that the room in which you install your
appliance must have a volume of 1 m
3
per 8 g of R 600a refrigerant
used in the appliance, so as to avoid the formation of inflammable
gas/air mixtures in the room where the appliance is located in the
event of a leak in the refrigerant circuit. The quantity of refrigerant
used in your appliance is indicated on the type plate on the inside
of the appliance.
• Do not connect the appliance to the supply with other equipment
using an extension cable - risk of overheating.
Connecting to the mains
Power supply (a.c.) and voltage at the operating point must comply
with the details on the type plate. The socket must be fused with a
10 A fuse or higher, it must be away from the rear of the appliance
and must be easily accessible.
Connect the appliance with a properly earthed fused plug
and socket only.
The wires in the mains lead are coloured in accordance with the
following code: green/yellow = earth, blue = neutral, brown = live.
Warning! This appliance must be earthed.
Operating and control elements for upper and middle compartment
Operating and control elements
for lower compartment
1
Upper compartment temperature display
2
Upper compartment temperature setting buttons
3
Middle compartment temperature display
4
Middle compartment temperature setting buttons
5
Audible warning on/off button
6
Interior light on/off button
7
Child-proof lock
8
On/off button
9
Fan button
bl
Temperature display
bm
Temperature setting buttons
bn
Audible warning on/off button
bo
Fan button
bp
Child-proof lock
bq
On/off button
Switching the appliance on and off
You are recommended to clean the appliance before switching it
on for the first time (see Cleaning).
To switch the appliance on: Press the ON/OFF button
until the temperature display lights up.
To switch the appliance off: Keep the ON/OFF button
pressed for approx. 3 seconds so that the temperature
display goes out.
Note: The two control systems can be switched on and off sepa-
rately.
Setting the temperature
The temperature of all com-
partments can be set sepa-
rately.
1 Upper compartment
2 Middle compartment
3 Lower compartment
To reduce the temperature:
Press the DOWN button.
To increase the tempera-
ture: Press the UP button.
- While you are entering the temperature, the set temperature will
flash on the display.
- You can change the settings in increments of 1°C briefly pressing
the button again.
- The electronic control system will switch over automatically about
5 seconds after the last time you pressed the button, and the
actual temperature will be displayed.
The following drinking temperatures are recommended for the
various types of wine.
Red wines: +14°C to +18°C
Rosé wines: +10°C to +12°C
White wines: +8°C to +12°C
Sparkling wines, Prosecco +7°C to +9°C
Champagne +5°C to +7°C
If F0 or F1 appears in the display, the appliance has a fault. Consult
your nearest customer service point.

Содержание

Похожие устройства

Скачать