Castel MAC E15-40 P Инструкция по эксплуатации онлайн [20/32] 272676

.11 USER ENTRY TO PROGRAMMING

DATA

Access for programming configuration para-

meters is only permitted when the appliance is

ON and there is no data memory error active.

Press and hold down push-buttons 7 and

8 at the same time for more than five sec-

onds; the computer will give access to the pro-

gramming function. Display 16 displays

PA, while display 15 will show the relative

value.

Use push-button 5 to select parame-

ter display (LED 5A illuminated), or display

16 with settings (LED 5B illuminated).

Use push-buttons 7 and 8 to scroll the

list of parameters (if LED 5A is illuminated)

or to modify the settings (if LED 5B is illu-

minated). The computer automatically exits

the programming function after approximately

40’.

.11 PRINTER (OPTIONAL)

- If you have to turn the instrument on/off press

- If you have to feed the paper by hand press

- If you have to change the roll of paper:

Turn the instrument off

Press for opening the panel at the front

of the instrument

Slip the roll of paper into the lower side of the

roller

Press as long as the roller drags the roll

of paper

Put the roll of paper into its box

Close the panel at the front of the instrument

- If you have to execute the print test

Switch off the power supply of the instrument

Press

Switch on the power supply of the instrument

- Signals: on/off led - if it is lighted, the instru-

ment will be in ON mode