Castel MAC E15-40 P Инструкция по эксплуатации онлайн [23/32] 272676

ffect: Any current chilling cycle is interrupted.

If a storage phase is in progress, the compressor and the fan set to stand-by sta-

tus.

When the appliance is in Stop status, press Start to set the compressor and fan

to stand by.

Beeper: Activated (3 seconds, then a pause of 30 seconds) until the mute button is

pressed.

Display: Alternates message “ALL 03” with standard display

Reset: Automatically resets only when probe reading has returned to normal.

Optional probe alarm (ALL 04)

(disabled if no probe is connected)

Input SW2 (ALL 05) (door microswitch alarm)

Cause: Input active for more than 5 minutes with appliance in start status.

Door open (close door) Microswitch fault (replace the microswitch)

Beeper: Activated (3 seconds, then a pause of 30 seconds) until the mute button is

pressed.

Display: Alternates message “ALL 05” with standard display

Reset: Press the mute push-button (with beeper off).

Automatically resets if input value returns to normal Alternatively, switch off the

panel then turn it back on (stand-by).

Input SW1 alarm (ALL 06)

(Press. max for all models)

(Thermal-magnetic switch for E15-40 / E15-65 / E15.2/70 / T14/2 / E20 / T20 / T24 /

T30 / T40 / T50 models)

(Oil diff. pressure switch for

E20 / T20 / T30 / T40 / T50 models)

Cause: Input active for more than 5 seconds

Effect: Sets the appliance to STOP.

Reset the max. pressure switch, thermal-magnetic switch or differential pressure

switch.

Beeper: Activated (3 seconds, then a pause of 30 seconds) until the mute button is

pressed.

Display: Alternates message “ALL 06” with standard display

Reset: Press the mute push-button (with beeper off) with no alarm cause displayed