Bork CH BRE 2018 SI Инструкция по эксплуатации онлайн [23/24] 29879

Instruction manual

Eng

11. Pressing the Power & Mode button again and the heater will go

back to LOW heat mode. Continuing to press the Power & Mode

button will cycle the unit through LOW, HIGH, AUTO,FAN mode.

12. To turn the heater off, press the Power & Mode button for above

two seconds and turn off power switch, then remove plug from

power outlet.

Oscillation Function

This function will work in any mode. Pressing the oscillation button

(OSC.) will allow the heater to oscillate back and forth. To stop the

oscillation, press the oscillation button once more.

THERMOSTAT INSTRUCTION

1. Press the Power & Mode button until the heater is set into the

AUTO mode.

2. To adjust set temperature, rotate the Thermostat knob clockwise

to increase the desired temperature and counter-clockwise to

decrease the desired temperature.

3. When the air temperature reaches 2 degrees above the set

temperature, the heater will stop to heat at once and stop to blow

after 15 seconds.

4. When the air temperature drops 1 degree below the set

temperature, the unit will come back on.

NOTE: It is normal for the heater to cycle ON and OFF as it maintains

the set temperature.