Liebherr WKt 6451 [5/5] Changing over door hinges

Liebherr WKt 6451 [5/5] Changing over door hinges
9
Changing over door hinges
GB
1.
Remove screw from lower hinge
bracket.
2.
Lift door 1, tilt to the right 2 and
remove 3.
4.
Turn lower hinge pin through 90° and
remove.
Insert pin on the opposite side and turn
through 90°.
5.
Transfer upper hinge components to
the opposite side.
6.
Transfer lower hinge bracket to the
opposite side.
7.
Locate door on upper pin.
8.
Tilt door inwards from the left 1. Se-
cure hinge pin with screw 2.
3.
Transfer handle to the opposite
side.
Malfunctions
You may be able to rectify the following faults by checking
the possible causes yourself:
Appliance does not function:
Is the appliance switched on?
Is the plug correctly fitted in the mains socket?
Is the fuse intact?
Loud running noise:
Is the appliance set up firmly on the floor?
Does the appliance cause nearby items of furniture or objects to
vibrate? Please note that noises caused by the refrigerant circuit
cannot be avoided.
The temperature is not low enough:
Is the temperature setting correct (see "Setting the temperature")?
Does the separately installed thermometer show the correct read-
ing?
Is the ventilation system working properly?
Is the appliance set up too close to a heat source?
If none of the above causes
apply and you cannot rectify
the fault yourself, contact the
nearest customer service de-
partment stating the type des-
ignation , service number
and appliance number as
indicated on the type plate.
The position of the type plate is shown in the section entitled
Description of the appliance.
Shutting your appliance down
If your appliance is to be shut down for any length of time, switch
it oand disconnect the plug or switch o or unscrew the fuse.
Clean the appliance and leave the door open in order to prevent
unpleasant smells.
The appliance complies with the relevant safety regulations and
EC Directives 2004/108/EC and 2006/95/EC.
Скачать