Liebherr GKPv 1470 [8/9] Warning

Changing over door hinges GKPv 65.. / BKPv 84..

Doorhingesshouldonlybechangedbyatrainedexpert.

Changing the door hinges must be done by two people.

6. Removethehingecomponentsfromthehingebracket.

1. Open door by about 90°.

Important note

The door must be opened 90°

before the lower hinge bracket

is removed.

This will hold the self-closing

mechanism that is integrated into

the door in the required position for

installation.

WARNING!

If the door is removed and reinstalled in the

closed position, this will lead to destruction of

the self-closing mechanism on the rst open-

ing of the door.

Important

As a result of its heavy weight, the door

must be held secure by one person.

2. Removehingebracket.

Pull the door out at the

bottom and lift off.

Bearing ring

Brass washer

Hinge bushing

Plastic washer

Note on point 6

The hinge bushing with brass washer and bear-

ingringmaystickinthedoormountingwhen

youpulloutthehingebracketand,inthiscase,

must be removed from it.

5. Remove bearing ring from

upper door mounting.

3. Unscrew base mounting

bracket.

4. Re-fit base mounting bracket on the

opposite side.