Falmec Mirabilia 67 New York Vetro (800) ECP [21/72] M warranty
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Falmec Mirabilia 67 New York Vetro (800) ECP [21/72] M warranty

Falmec Mirabilia Isola 85 Fenice Vetro (800) ECP [21/72] M warranty
19
English
are completely dry before repositioning them. To remove and replace these filters, see
the instructions in point H1. This operation should be performed at regular intervals.
2. CHARCOAL FILTERS
These trap the odours present in the stream of air that passes through them. The air is puri-
fied by passing a number of times through the filters and being recirculated into the kitchen.
The charcoal filters cannot be cleaned, and should be replaced on average every 3-4 months
(according to use). To replace the charcoal filters, see the instructions in point H2.
3. CLEANING THE OUTSIDE OF THE APPLIANCE
It is advised to clean the external hood surfaces at least every 15 days in order to avoid that
oily or greasy substances affect the steel surfaces.
The ouside of the range hhod should be cleaned using a damp cloth and neutral liquid
detergent or denatured alcohol.
In case of fingerprint-less finish (fasteel) clean only with water and neutral soap using
clean with a soft cloth, rinse and wipe dry thoroughly. Do not use products that contain
abrasive substances, rough cloths or cloths specifically designed for cleaning steel. Using
abrasive substances or rough cloths will inevitably damage the finish of steel. The steel
surface will be irrevocably damaged if the instructions above are not complied with.
Keep these instructions together with the instructions for use of your hood.
The manufacturer accepts no liability for any damage caused by non-compliance with the
instructions above.
4. CLEANING THE INSIDE OF THE APPLIANCE
The electrical parts or parts of the motor assembly inside the range hood must not be
cleaned using liquids or solvents.
Do not use abrasive products. All the above operations must be performed after having dis-
connected the appliance from the mains power supply.
WARRANTY
M
The new equipment is covered by warranty.
The warranty conditions are provided by the distributor.
The manufacturer is not liable for any inaccuracies in this booklet resulting from printing or
transcription errors. The manufacturer reserves the right to modify its products as it consid-
ers necessary or in the interests of the user, without compromising their essential safety and
operating characteristics.
HOOD INSTALLATION
N
WARNING: Failure to install the screws or fixing device in accordance with these instructions
may result in electrical hazards.
O1 - INSTRUCTIONS FOR WALL-MOUNTED MIRABILIA HOODS
Phase 1
- Place the support bar next to the wall (A-Fig. O1), at a height above the cooktop which cor-
responds to X+300 mm.
- With a spirit level check that the bar is horizontal. Mark a point at each end of the bar.
- Drill the holes, fit 2 ø8mm expansion joints and screw in the bar.
Phase 2
- Fit the hood to the support bar (Fig. O2).
- Adjust hood alignment with the relevant screws: The top screw (B) adjusts the distance from
the wall. The bottom screw (C) adjusts the vertical sliding movement.

Содержание

Похожие устройства

are completely dry before repositioning them To remove and replace these filters see the instructions in point H1 This operation should be performed at regular intervals 2 CHARCOAL FILTERS These trap the odours present in the stream of air that passes through them The air is puri fied by passing a number of times through the filters and being recirculated into the kitchen The charcoal filters cannot be cleaned and should be replaced on average every 3 4 months according to use To replace the charcoal filters see the instructions in point HZ 3 CLEANING THE OUTSIDE OF THE APPLIANCE 4 CLEANING THE INSIDE OF THE APPLIANCE The electrical parts or parts of the motor assembly inside the range hood must not be cleaned using liquids or solvents Do not use abrasive products All the above operations must be performed after having dis connected the appliance from the mains power supply M WARRANTY The new equipment is covered by warranty The warranty conditions are provided by the distributor Zk The manufacturer is not liable for any inaccuracies in this booklet resulting from printing or transcription errors The manufacturer reserves the right to modify its products as it consid ers necessary or in the interests of the user without compromising their essential safety and operating characteristics NJ HOOD INSTALLATION WARNING Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards 01 INSTRUCTIONS FOR WALL MOUNTED MIRABILIA HOODS Phase 1 Place the support bar next to the wall A Fig 01 at a height above the cooktop which cor responds to X 300 mm With a spirit level check that the bar is horizontal Mark a point at each end of the bar Drill the holes fit 2 08mm expansion joints and screw in the bar Phase 2 Fit the hood to the support bar Fig 02 Adjust hood alignment with the relevant screws The top screw B adjusts the distance from the wall The bottom screw C adjusts the vertical sliding movement 19 English It is advised to clean the external hood surfaces at least every 15 days in order to avoid that oily or greasy substances affect the steel surfaces The ouside of the range hhod should be cleaned using a damp cloth and neutral liquid detergent or denatured alcohol In case of fingerprint less finish fasteel clean only with water and neutral soap using clean with a soft cloth rinse and wipe dry thoroughly Do not use products that contain abrasive substances rough cloths or cloths specifically designed for cleaning steel Using abrasive substances or rough cloths will inevitably damage the finish of steel The steel surface will be irrevocably damaged if the instructions above are not complied with Keep these instructions together with the instructions for use of your hood The manufacturer accepts no liability for any damage caused by non compliance with the instructions above

Скачать