Retigo BC511P (встр. агрегат) Инструкция по эксплуатации онлайн [12/24] 277403

Retigo BC511P (встр. агрегат) Инструкция по эксплуатации онлайн [12/24] 277403
11
ENGLISH
GB
Temperature Shock Freezing
Select shock freezing by pressing key: LED
, , and blink. The display
shows the end cycle temperature. Using the and
keys the end shock freezing temperature (-18°C)
can be changed. Insert the core probe into the
product. To select the SOFT cycle press the key.
LED will turn off.
Start the cycle by pressing key . LED ,
and are permanently on.
The test for the proper insertion of the probe will
start.
If the test gives a positive result, the blast chilling
cycle starts, in case of negative result the
machine will run a timed blast chilling (see proper
chapter).
During shock freezing the display shows the
temperature detected by the core probe.
By pressing the key, temperature detected
by the chamber probe can be visualized.
If the product temperature reaches the
established value within the established time set
on parameter r6, the cycle is considered as
completed: a preserving cycle is automatically
started and an intermittent sound confirm the
correct conclusion of the cycle.
In case the product temperature does not reach
the established value within the maximum time
allowed, the cycle continue: LED blinks
accompanied by an intermittent sound. To stop
the alarm press any key.
As soon as product temperature is lower than the
established value the shock freezing cycle is
considered as completed and a preserving cycle
is automatically started.
During preservation the display shows the
temperature detected by the chamber probe; LED
is switched on.
Press to conclude the preservation cycle.
Time Defrosting
Select defrosting by pressing key twice:
LED , , and blink. The
display shows the cycle duration. By using the
and keys, the freezing time can be
changed.
To select the SOFT cycle press the key.
LED will turn off.
Start the cycle by pressing key . LED
, and are permanently on.
Once the set time is over, the shock freezing cycle
is considered as completed and a preserving
cycle is automatically started.
During preservation the display shows the
temperature detected by the chamber probe;
LED is switched on.
Press to conclude the preservation cycle.
1
3
2
1
3
2

Похожие устройства

Скачать