Gold Medal 60 Special [3/18] General instructions

P-60/60 Special Model No. 1866, 1866XJ, 2085, 2086, 2656, 2656KC

http://www.gmpopcorn.com Page 3

GENERAL INSTRUCTIONS

INSPECTION OF SHIPMENT

Unpack all cartons and check thoroughly for any damage that may have occurred during transit. Damage

claims should be filed immediately with the transportation company.

SETUP

Your new Popper was assembled and tested at the factory. Remove all packing material and tape before

starting operation.

ELECTRICAL REQUIREMENTS

Models 1866, 2086, 2085: 120V, 60Hz, 1220W

Models 2656, 2656KC: 120V, 60Hz, 1300W

Model 1866XJ: 100V, 50/60Hz, 1220W

Your electrician must furnish sufficient power for proper machine operation. We recommend this popper

be on a dedicated and protected circuit. Failure to wire properly will void the warranty and may result in

damage to the machine.

It is Gold Medal® Products Company’s recommendation that this machine be plugged directly into a wall

outlet. The use of extension cords is not recommended. This may cause sacrificed and/or reduced

performance and can become a safety hazard.

BEFORE YOU PLUG IN THE MACHINE

1. Make sure the wall outlet can accept the grounded plugs (where applicable) on the power supply

cord.

2. The wall outlet must have the proper polarity. If in doubt, have a competent electrician inspect

the outlet and correct if necessary.

3. DO NOT use a grounded to un-grounded receptacle adapter.