Waring MX1000XTXEE Инструкция по эксплуатации онлайн [12/36] 278643

TO WASH AND RINSE CONTAINER:

1. REMOVE CONTAINER FROM MOTOR BASE. Remove lid. Rinse

container interior and lid under running water. Add washing solution to

container. Scrub and flush out the container interior and lid to dislodge

and remove as much food residue as possible. Empty container.

2. Wipe down exterior of container with a soft cloth or sponge dampened

with washing solution. Wash lid and lid insert in fresh washing solution.

Fill container ¼ full with fresh washing solution, cover (with lid only),

place on motor base and run on the highest speed for two (2) minutes.

Empty container.

3. Repeat step (2) using clean rinse water in place of washing solution.

IMPORTANT

NOTE: IN ORDER TO MINIMIZE POSSIBILITY OF SCALDING, TEMPERATURE

OF WASHING SOLUTION AND RINSE WATER MUST NOT EXCEED 46˚C, AND

QUANTITY USED MUST NOT EXCEED ¼ CONTAINERFUL.

IF HIGHER TEMPERATURES OR LARGER QUANTITIES ARE USED, OBSERVE

ALL PRECAUTIONS GIVEN IN THE OPERATING MANUAL UNDER “HOT

BLENDING INSTRUCTIONS”.

TO SANITIZE AND DRY CONTAINER:

1. Wipe down exterior of container with a soft cloth or sponge dampened

with sanitizing solution.

2. Fill container with sanitizing solution, cover, place on motor base, and

run on high speed for two (2) minutes. Empty container. Dislodge any

residual moisture from blade assembly by placing empty container on

motor base and running on the highest speed for two (2) seconds.

3. Sanitize lid and lid insert by immersing in sanitizing solution for two

(2) minutes.

4. Do not rinse container, lid, or lid insert after sanitizing is completed.

Allow parts to air-dry.

TO CLEAN AND SANITIZE MOTOR BASE:

1. UNPLUG POWER CORD. Wipe down exterior surfaces of motor base

with soft cloths or sponges dampened with washing solution, rinse

water, and sanitizing solution. Prevent liquid from running into motor

base by wringing all excess moisture from cloths or sponges before

using them.

DO NOT IMMERSE MOTOR BASE IN WASHING SOLUTION, RINSE

WATER OR SANITIZING SOLUTION.

2. Allow motor base to air-dry before using.

Any other servicing should be performed by an authorized service

representative.