Waring MX1000XTXEE Инструкция по эксплуатации онлайн [11/36] 278643

REMOVING THE SOUND ENCLOSURE

To remove the sound enclosure, unplug your blender and follow these steps:

1. Open sound enclosure and remove blender container.

2. Remove front portion of sound enclosure by disengaging both sides at

the pivot point.

2. Remove rubber jar pad.

4. Remove 3 screws from blender base and remove sound enclosure.

TURNING OFF YOUR BLENDER

Whether your blender is in STANDBY mode, NEW PROGRAM mode, or

the motor is running, pressing the ON/OFF

button will stop the unit

from running and will turn the power off. The LCD display will turn off.

NOTE: All programs and current settings will be restored next time you

turn unit on.

CLEANING AND SANITIZING INSTRUCTIONS

THE CONTAINER MUST BE CLEANED AND DRIED AFTER EACH USE

OF THE BLENDER ACCORDING TO THE FOLLOWING INSTRUCTIONS.

FAILURE TO DO SO MAY ALLOW RESIDUES OF PROCESSED MATERIAL

TO COLLECT ON THE INTERNAL SEALS OF THE BLADE ASSEMBLY,

RENDERING THEM INEFFECTIVE.

• Wash, rinse, sanitize and dry container prior to initial use and whenever

it will not be used again within a period of 1 hour.

• Wash and rinse container after each use.

• Clean and sanitize motor base prior to initial use and after each use.

• Washing solutions based on non-sudsing detergents and chlorine-based

sanitizing solutions having a minimum chlorine concentration of 100 PPM

are recommended.

The following washing, rinsing, and sanitizing solutions, or their equivalents,

may be used.

SOLUTION PRODUCT DILUTION IN wATER TEMPERATURE

Washing Diversy Wyandotte 4 Tablespoons/ Hot 46˚C

Diversol BX/a or CX/A 3.8 Litres

Rinsing Plain Water Warm 35˚C

Sanitizing Clorox

1 Tablespoon/ Cold 10–21˚C

Institutional Bleach 3.8 Litres

• In repetitive batch-processing applications, frequent cleaning of the

container will prolong the life of the blade assembly. In no case should

actual running time between cleanings exceed ½ hour.

• Do not use container to store processed foods or beverages.