Waring MX1000XTXEE Инструкция по эксплуатации онлайн [9/36] 278643

DRINK COUNTER

Your reprogrammable blenders are equipped with a drink counter to keep

track of daily drink totals and total drink counts for your machine. To display

the counts, hold program buttons

simultaneously for 3 seconds.

Your display will read:

DAILY COUNT XXXX

TTL COUNT XXXXX

Daily Count will display the numbers of drinks mixed per day. Total Count

is the accumulation of all drinks made since first use of the blender.

The Daily Count can be reset by holding in Program buttons

simultaneously for 3 seconds then, pressing ON/OFF button for 3 seconds.

Daily Count will reset to zero and Total Count will remain unchanged.

If Total Count needs to be reset, call your nearest Waring authorized service

facility for information.

NOTE: Use of the PULSE features will not add to the daily or total drink

counts.

RESETTING THERMAL PROTECTION

• The blender you have purchased is equipped with an Automatic Reset

Switch to protect the motor from overheating.

• If your blender stops running under heavy use, turn the power switch to the

STANDBY or OFF position and unplug the power cord. Empty the blender

container of all its contents and allow approximately 5 minutes for the

motor to cool down.

• Plug the power cord back into the outlet and continue blending.

IMPORTANT - HOT BLENDING INSTRUCTIONS

To minimize the possibility of being scalded when blending hot materials,

the following precautions and procedure must be observed.

• Hot materials are those that are 100°F (38°C) or hotter.

• Limit the amount of materials processed to 1 pint.

• Completely remove the center portion of the two-piece container lid before

starting motor (this will allow venting of the rapidly heated and expanded

air inside the container when blender is running).

• Always start blending on lowest speed setting, and then progress to

desired speed.

• Never stand directly over blender when it is being started or while it

is running.