Gemm BCT/05 (встр. агрегат) Инструкция по эксплуатации онлайн [87/138] 279081

BCT_T Rev.00 05-2015 pag. 87

5 – INSTALLATION

Use the utmost care in handling the appliance, so as to avoid damage to persons or things.

Do not start the appliance if there are faults on the control panel or parts are damaged.

AUTHORIZED PERSONNEL

Specialised electrician.

Individual safety devices:

 safety shoes;

 safety gloves.

Personnel carrying out such operations must not wear rings, wrist watches, jewellery, loose or unfastened garments,

such as, for example, ties, torn garments, scarves, unbuttoned jackets or blouses with open zips, etc. In general,

personnel must wear safety apparel.

5.1 – PREPARATION FOR INSTALLATION

For installation prepare an area of manoeuvre suitable for the dimensions of the appliance (see fig. 2) and the chosen

lifting equipment.

The installation site must be prepared with all the connecting systems required for the appliance to work.

Choose an installation site with requisites that will allow the appliance to be used safely. The area must provide good

support, with a solid flat floor whose finish will ensure a suitable and safe working place for personnel.

Install the appliance in a place with natural and/or artificial light suitable for the operations to be carried out (in

compliance with specific regulations).

5.2 – UNPACKING

Check that the packing has not been damaged during transport.

5.2.1 – MEANS REQUIRED

Use a fork-lift truck or equivalent equipment to lift the appliance.

The use of unsuitable equipment can cause accidents to those involved in the operation and/or

damage to the appliance.

The manufacturer declines all responsibility for improper non-compliant use of equipment for

lifting, transport and handling.