Gemm BCT/05 (встр. агрегат) [91/138] Foreword

BCT_T Rev.00 05-2015 pag. 91

7.4 – USER INTERFACE

7.4.1 – FOREWORD

Foreword

The following operating status exist:

- the “off” status (the device is not powered)

- the “stand-by” status (the device is powered and is off)

- the “on” status (the device is powered, is on and is in stand-by for the start-up of an operating cycle)

- the “run” status (the device is powered, is on and an operating cycle is in progress).

Hereon, the term "device switch-on" means the passage from the "stand-by" status to the "on" status. the term "switch-

off" means passage from the "on" status to the "stand-by" status.

If a power cut occurs during the "stand-by" status or during the "on" status, the device will re-propose the same status

when the power supply is restored.

If a power cut occurs during the "run" status, the device will operate as follows when this is restored:

- if a temperature-controlled blast chilling or deep freezing operation was in progress, these will be started again

from the beginning

- if a timed-controlled blast chilling or deep freezing operation was in progress, these will be started again from the

moment the power supply was cut-off

- if storage was in progress, this will be re-proposed.

7.4.2 – DEVICE COMMISSIONING

Device commissioning

Operate as follows:

2. Press and release the ON/STAND-BY key (1) and then press the highest interactive key on the left (2) to unlock

the keyboard.