Quality Espresso Visacrem V6 Plus 2GR дисплей Инструкция по эксплуатации онлайн [9/12] 279958

3.5 Pressure compensation

When the machine is turned on with the temperature of the boiler below 60º, the system will start

up a pressure compensation cycle, as shown on the screen, with the aim of avoiding possible

suction of liquids by depression inside the boiler.

Once this cycle has finished, the screen disappears (when the boiler reaches 103º). The screen

can also be eliminated by pressing the PAS or MOD keys.

3.6 Boiler emptying cycle

The user can undertake a partial emptying of the boiler, which will be shown on the screen,

maintaining pressed the hot water outlet button for approximately 6 seconds.

The system will force the hot water out for 25 seconds. After this time, the hot water coming out

will stop, and the cycle can be repeated by maintaining the button pressed within 10 seconds.

NOTE: the boiler emptying cycle can be interrupted by either pressing the hot water outlet button

again when it is emptying or when it has completed a 25-second cycle and the button has not

been pressed again. The warning screen disappears when the emptying cycle has been

completed.

3.7 Clean cappuccino unit (according to model)

This warning screen shows when approximately an hour has passed between a cappuccino or

milk service and the next service.

A cleaning cycle must be carried out by pressing the corresponding “clean” button on the

cappuccino and milk service panel. (“CAPPUCCINO CLEAN CYCLE START” appears on the

screen).

When the clean button is pressed again the text “CAPPUCCINO CLEAN CYCLE FINISH” appears

on the screen.

To eliminate the display screen, press the PAS key.

NOTE: Remove the tube from the milk container before starting the cleaning cycle.