![Entel HT-446 [13/30] Check modify the frequency](/img/pdf.png)
Entel HT-446 [13/30] Check modify the frequency
![Entel HT-446 [13/30] Check modify the frequency](/views2/1033607/page13/bgd.png)
12
Programming your HT446E radio
Checking the current configuration
• A momentary press of the top side function
button will cause the radio to beep the
frequency programmed into the channel
(see Frequency Table beep codes on P.15).
Changing the assigned frequency
• Press and hold the PTT button and the top
side function button together until the
radio emits a “warble” sound and
illuminates the LED red, confirming the
radio is in channel programming mode.
• Using the upper side function button enter
the frequency number from the table. For
example to enter frequency number 7 press
the upper button 7 times. There are 8
frequencies available in total (see Frequency
Table on P.15).
Now press the PTT button to store the setting
and automatically return to the “check
configuration” mode (a long beep and flashing
yellow LED will confirm this action).
To check the entered setting, press the top side
function button.
Note: If you accidentally “go past” the required
frequency number, keep pressing the button until
you hear the “warble” sound again (emitted on
button press 9). This confirms you are back at the
start of the channel assigned frequency mode.
Please note: The orange button allows you to
escape from any setting without saving the data.
If you are in frequency programming mode but
decide not to save the setting you may press
the orange button to exit without saving.
Check / Modify the Frequency
The radio’s frequency and tone configuration can be changed in user programming mode. This will
allow you to put any of the standard frequencies or tones in to any channel position. When a radio
has been configured this information can be quickly and easily cloned into other units using an
optional cloning cable. The programming process is confirmed using a series of audible beep tone
patterns.
To put radio in to user programming mode
• Press and hold the top side function button
and PTT button and turn the radio on
• The radio will emit a beep and
the LED slowly flash yellow to confirm “user
programming mode” has been entered.
• Select the channel to be checked /
modified.
HT446E
Содержание
- User guide ht446 series 1
- Common information page 2
- Ht446e 2
- Ht446l 2
- Introduction 2
- Table of contents 2
- Certification 3
- Declaration of conformity 3
- M austin 3
- Quality manager 3
- Serial number ________________________________ 3
- Battery care 4
- Battery pack precautions 4
- Common 4
- Introduction 4
- Note do not wash the transceiver if you suspect the waterproofing seal may be damaged 4
- Please return to your supplier for inspection repair 4
- Radio care 4
- Battery care information 5
- Battery communications 5
- Battery pack 5
- Common 5
- Common 6
- Optional accessories 6
- Packing list 6
- Attaching removing the battery pack 7
- Attaching removing the belt clip 7
- For complete up to date list of optional accessories visit www entel co uk 7
- Optional accessories 7
- Preparing your radio for use 7
- Attaching removing audio accessories 8
- Charging your radio 8
- Common 8
- Preparing your radio for use 8
- Using your radio 9
- Using your radio 10
- Dealer programmable features 11
- Ht446e 11
- Standard features 11
- Controls indicators 12
- Ht446e 12
- Changing the assigned frequency 13
- Check modify the frequency 13
- Checking the current configuration 13
- Programming your ht446e radio 13
- To put radio in to user programming mode 13
- Changing the assigned ctcss dcs tone 14
- Check modify ctcss dcs tone 14
- Checking the current configuration 14
- Special notes re dcs tones 14
- User programmable key lock 15
- How to clone a radio 16
- Radio cloning ht446e 16
- Transferring data 16
- 446 0625 mhz 17
- 446 1875 mhz 17
- 446 3125 mhz 17
- 446 4375 mhz 17
- 446 5625 mhz 17
- 446 6875 mhz 17
- 446 8125 mhz 17
- 446 9375 mhz 17
- Ctcss pl tone table 17
- Frequency table 17
- Ht644e 17
- No frequency beeps 17
- Ref ctcss hz 17
- Dcs dpl tone table 18
- Ht644e 18
- Ref dcs beeps 18
- Ht446l 20
- Ht644l 20
- Standard features 20
- Antenna 21
- Channel scan control 21
- Controls indicators 21
- Dealer programmable button 1 21
- Dealer programmable button 2 21
- Dealer programmable button 3 21
- Ht644l 21
- Led indicator 21
- Microphone 21
- On off 21
- Push to talk ptt button 21
- Speaker 21
- Volume control 21
- Lcd indicators 22
- Changing the assigned frequency 23
- Changing the assigned tone 23
- Check modify the frequency tone 23
- Checking the current configuration 23
- Programming your ht446l radio 23
- To put radio in to user programming mode 23
- User programmable key lock 24
- How to clone a radio 25
- Radio cloning ht446l 25
- Transferring data 25
- Default channel configuration 26
- Problem probable cause solution 27
- Troubleshooting guide 27
- Choice 30
- Professional s 30
Похожие устройства
- Bernina Bernette E92c Инструкция по эксплуатации
- Philips HR 1571/30 Инструкция по эксплуатации
- Grundig Satellit-750 Инструкция по эксплуатации
- Soundmax SM-DVD5101 Инструкция по эксплуатации
- Philips HR 1565/55 Инструкция по эксплуатации
- Hytera MD-785 Инструкция по эксплуатации
- Samsung P805J Инструкция по эксплуатации
- Philips HR 2870/50 Инструкция по эксплуатации
- Hytera MD-785G Инструкция по эксплуатации
- Panasonic TX-34P250T Инструкция по эксплуатации
- Philips HR 2000/70 Инструкция по эксплуатации
- Hytera PD-785 Инструкция по эксплуатации
- Konica Minolta Dynax 5D Инструкция по эксплуатации
- Hansa FCCW 54136060 Инструкция по эксплуатации
- Philips HR2170/40 Инструкция по эксплуатации
- Hytera PD-785G Инструкция по эксплуатации
- Bernina Bernette E82e Инструкция по эксплуатации
- Philips HR 1342/00 Инструкция по эксплуатации
- Hytera PD-705 Инструкция по эксплуатации
- Soundmax SM-DVD5100-N Инструкция по эксплуатации