MCZ Forma T95 [9/40] Installation

3-INSTALLATION

INSTALLATION

FOREWORD

The installation position must be chosen according to the room, to the smoke extraction system, to the chimney ue. Check with local

authorities whether there are any restrictive regulations in force regarding the combustion air inlet, the smoke outlet system, the

ue or the chimney cap. The manufacturer declines all responsibility in the event of installations that do not comply with the laws in

force, incorrect room air exchange, electrical connection non-compliant with the standards and inappropriate use of the appliance. The

installation must be carried out by a qualied technician, who must issue a declaration of conformity of the system to the purchaser and

will assume full responsibility for nal installation and consequent good operation of the product.

In particular one must ensure that:

• there is a suitable combustion air inlet and smoke outlet in compliance with the type of product installed

• other stoves or devices installed do not cause depression in the room where the product is installed

• when the product is switched on there is no reux of smoke in the room

• fumes extraction takes place in total safety (sizing, smoke seal, distances from ammable materials..).

We especially recommend to check the data tags of the ue for the safety distances that must be observed in presence

of combustible materials and the type of insulating material to be used. These indications must be followed strictly to

prevent serious harm to people and the integrity of the home. The installation of the appliance must ensure easy access to

clean the appliance itself, the smoke outlet pipes and the ue. It is forbidden to install the product in rooms with a re hazard.

Installation in studio ats, bedrooms and bathrooms is only allowed with sealed or closed appliances equipped with

suitable combustion air ducting directly outside. Always maintain adequate distance and protection in order to prevent

the product from coming into contact with water.

In the event there are several appliances installed, the external air inlet must be sized accordingly.

MINIMUM DISTANCES

We recommend installing the stove away from walls and furniture, with a minimum clearance to allow eective aeration of the appliance

and a good distribution of heat in the room. Observe the distances from ammable or heat-sensitive objects (sofas, furniture, wood

panelling, etc.) as specied. The front distance from ammable materials must be at least 1 metre.

If particularly delicate objects are present, such as furniture, curtains or sofas, increase the product clearance accordingly.

If the oor is made of combustible material, it is recommended to use protection made of non-combustible material (steel, glass...) that

also protects the front from falling combusted material during cleaning operations.

The appliance must be installed on a oor with adequate load capacity.

If the existing construction does not meet this requirement, one must take appropriate measures (for example a load distribution plate).