Hytera PD-785G [28/32] Troubleshooting

Hytera PD-785G [28/32] Troubleshooting
23
Troubleshooting
Phenomena Analysis Solution
The radio can not be
powered on.
The battery may be improperly installed. Remove the battery and attach it again.
The battery may run out. Recharge or replace the battery.
The battery may suffer from poor contact caused by
dirtied or damaged battery contacts.
Clean the battery contacts. If the problem can not be solved,
contact your dealer or authorized service center for inspec-
tion and repair.
D u r i n g r e c e i v i n g
signals, the voice is
weak, discontinuous
or totally inactive.
The battery strength may be too low. Recharge or replace the battery.
The volume may be set to a low level. Increase the volume.
The antenna may get loose or may be improperly
installed.
Power off the radio, and re-install the antenna.
The speaker may be blocked or damaged.
Clean surface of the speaker. If the problem can not be
solved, contact your dealer or authorized service center for
inspection and repair.
Yo u can n o t com -
municate with other
members.
The frequency or signaling may be inconsistent with
that of other members.
Set your TX/RX frequency and signaling to the same as that
of other members.
The channel type (digital/analog) may be set incon-
sistently.
Make sure all members are on the same digital/analog
channel.
You may be too far away from the group members. Move towards other members.
Irrelevant commu-
nication or noise is
heard on the channel.
You may be interrupted by radios using the same
frequency.
Change the frequency, or adjust the squelch level.
The radio may be set with no signaling.
Set signaling for all member radios to avoid interference at
the same frequency.

Содержание

Скачать
Случайные обсуждения