Hytera PD-705 [14/22] Functions and operations

Hytera PD-705 [14/22] Functions and operations
9
Functions and Operations
Adjust Power Level
With this feature, you may switch power levels quickly. Generally,
we recommend you to adopt low power for battery saving.
However, if you cannot communicate with radios located at a
distant place with low power, please select high power.
Operation:
Press the programmed Adjust Power Level key to switch between
high power and low power (from low power to high power: a high-
pitched tone sounds; from high power to low power: a low-pitched
tone sounds).
Scan
This feature allows you to listen to communication activities on
other channels so that you can keep a close track of your team
members.
Operation:
1. To enable the feature, press the programmed Scan key in
standby mode (a high-pitched tone sounds); or
Switch to a channel on which the feature Auto Scan is
enabled via the programming software.
2. After the feature is enabled, your radio will scan according to
the scan list set for the channel on which scanning starts. The
scanning process is as follows:

During scanning, the LED ashes orange.

When activities are detected on a channel, the radio will stay
on the channel to receive current activities, and the LED glows
green.

If you don’t want to hear activities on the channel, press the
programmed Nuisance Temporary Delete key to remove the
channel from the scan list temporarily.

If you want to continue staying on the channel, press the
programmed Monitor or Squelch Off key during scan stay.
3. To exit the scanning process, press the programmed Scan key
again (a low-pitched tone sounds).
Talk Around
This feature allows you to continue communication even when the
repeater malfunctions, or when your radio is out of the repeater’s
range but within the coverage range of other radios.
Operation:
Press the programmed Talk Around key to enable the feature (a
high-pitched tone sounds). To disable the feature, press this key
again (a low-pitched tone sounds).
Monitor
To adjust match conditions for signal receiving, you can enable the
feature “Monitor”.
Operation:
Press the programmed Monitor key to enable the feature (a
high-pitched tone sounds). To disable the feature, press this
key again (a low-pitched tone sounds).

Содержание

Скачать
Случайные обсуждения