Bomann GSPE 872 Инструкция по эксплуатации онлайн [7/24] 280859

Fixing the decoration panel

Fixing the decoration panelFixing the decoration panel

Fixing the decoration panel

• Insert the brackets into the holes of the decorative panel and turn the screws in.

• Hook the decorative panel with the brackets into the provided slots on the appliance

front.

• Align the panel and the appliance front against each other and fix the panel on the

appliance door.

• First remove the factory-mounted short screws (4 x s1) from the door inside.

• Screw the supplied long screws (4 x s2).

Adjusting of the door spring tension

Adjusting of the door spring tensionAdjusting of the door spring tension

Adjusting of the door spring tension

After fixing the decoration panel, the door spring tension must be adjusted accordingly.

• Turn the adjusting screws as needed in the clockwise or counterclockwise

direction. The steel cable tightens or loosens.

• Check the door spring tension. If the door remains fully open horizontally

and can still be easily closed, the tension is correct. Otherwise do the ad-

justing again.

Connection to the water supply

Connection to the water supplyConnection to the water supply

Connection to the water supply

Connect the water inlet hose as well as the water drain hose properly. Follow the instructions that we give you

under "Water connection".

Installation to the power supply

Installation to the power supplyInstallation to the power supply

Installation to the power supply

Consider the instructions that we give you under "Electrical connection".

Adjusting the feet

Adjusting the feetAdjusting the feet

Adjusting the feet

Place the appliance in its proper position and take care that it is leveled solid and horizontal. Check this with a

spirit level.

• You can adjust the back foot by the adjusting screw (a) at the center of the

appliance plinth front with an Allen key.

• Adjust the front feet (b) with a screw-wrench until the dishwasher is leveled.

The maximum adjustment height of the feet is 50 mm.

Fixing the dishwasher

Fixing the dishwasherFixing the dishwasher

Fixing the dishwasher

Fix the appliance by tighten the screws from the appliance inside to the provided holes accordingly.

1 If the worktop made of wood, fasten the appliance to the worktop.

2 If the worktop made of marble or granite, fasten the appliance sideways with

the housing unit. Put the screw covers on.