Lincat D5H/100S [6/8] Cleaning

IS 282 ECN 3607 Page 6 of 8

D3 and D5 models have a manual temperature control (4). Turn to setting 5 and

wait 30 minutes before loading with pre-heated food. Adjust the temperature as

required.

C6 models have a digital display controller (4). Wait 30 minutes until the display

shows 85 Deg C. Load with pre-heated food. Adjustment between 75-95 Deg C is

available by pressing and holding the ‘Set’ button and using the buttons marked <<-

< and >->>.

Note: The temperature display relates to the air temperature inside the

cabinet – not the food temperature.

Humidity feature - Fig 3

Fig 3

The integral water bath B with lid A is intended to be used to keep food moist when

the appliance is lightly loaded. Fill with warm water. To prevent condensation, do

not over-load shelves with food. Check the water level – be aware the water bath

will become hot during use.

Adjusting shelf positions

Disconnect from electricity supply and allow appliance to cool. Slide the doors to

the centre and lift up and out of the bottom runners to remove. Remove the

shelves. Use the Allen key provided to adjust the shelf supports. At the rear, the

shelf supports are situated behind the cable panel. Remove the screws in the cable

panel and open the panel until adjustment of the shelf supports can be made. Do

not completely remove the cable panel. Replace the panel, ensuring cables are

not trapped.

CLEANING

Do not use a water jet or steam cleaner, and do not immerse this appliance.