Lincat EB6FX — эффективное управление режимами работы котла для экономии энергии [7/12]

IS590 ECN 3846 Page 7 of 12

Predictive Eco monitors the boilers usage and decides when the unit should switch in

and out of Eco mode. This is best used with the timed option to save the most amount

of energy.

All units are fitted with a settings PIN lock. Press Ready and then Settings to access

the PIN setting screen. The EB3F/PB is fitted with an extra setting to lock the dispense

tap operation and an additional time setting that is used to set the maximum time after

the last dispense that the boiler is unlocked for. A master PIN code is available from

Lincat Service should you forget the user set PIN.

Filter Replacement

The filter display shows the estimated life remaining in the filter cartridge. A reminder

message is displayed when the filter needs changing.

To replace the filter:

Twist the base of the filter (E) 90 degrees to the left and lower the cartridge out of the

appliance. It will contain a small amount of water.

Insert the new filter into the recess and lock in place by twisting to the right.

Press the “Filter life icon” and follow the on-screen instructions to reset the filter life.

Drain off approximately 5 litres of water to remove any loose carbon particles from the

filter.

The boiler will not fill if the filter is removed as the filter head incorporates a shut-off

valve.