Lincat LGR2 [5/6] Cleaning

IS 309 ECN 3607 Page 5 of 6

OPERATING INSTRUCTIONS

Only qualified or trained personnel should use this appliance.

Before first use, ‘season’ (prepare) the cooking surface. Cover the surface with salt

to a depth of 2-3mm. Connect the appliance to an electrical supply – the green

neon illuminates to indicate power to the appliance. Turn the control knob on and

heat the salt until it changes colour. Remove all salt with a scraper or brush. Cover

the surface with vegetable oil and heat up the oil. Scrape the oil down the drainage

hole and into the fat drawer. Pour fresh oil onto the griddle plate and begin cooking.

During use, the amber neon will extinguish when the set temperature is reached,

and will then cycle as the element operates.

CLEANING

Do not use a water jet or steam cleaner, and do not immerse this appliance.

Clean all panels with warm water and mild detergent, do not use abrasive

materials. Dry with a soft cloth.

SERVICING, MAINTENANCE AND

COMPONENT REPLACEMENT

All servicing, maintenance and component replacement on this appliance should be

carried out by one of our recommended service engineers.

Please refer to the Service Help Desk number on the final page of this manual.

Part Number

Description

Used on

EL146

Element

LGR

EL147

Element

LGR2

KN240

Control knob

LGR, LGR2

NE42

Amber neon

NE43

Green neon

PL202

Mains cable

TH107

Thermostat

FAULT FINDING

SPARE PARTS LIST