RST RST02875 Инструкция по эксплуатации онлайн [3/10] 284914
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

RST RST02875 Инструкция по эксплуатации онлайн [3/10] 284914

RST RST02875 Инструкция по эксплуатации онлайн [3/10] 284914
3
WIRELESS REMOTE SENSOR REGISTRATION PROCEDURE
1. Insert x4 AA batteries first to the main unit, the temperature display shows - - . – While the wave icon will keep blinking for
2 minutes indicate unit is in sensor searching mode.
2. In a second step, insert the x2 AAA batteries for the sensor unit. The LED on the front panel will start flashing at a rate of one
time per around 2 seconds indicates channel-1 is in use.
3. While the LED is flashing, press once the [CH] key will change the sensor channel setting to 2. Keep toggle on [CH] key
can change channel setting up to 5. The LED is blinking at a frequency to indicate the channel setting. i.e. continuous blinks
2 times indicate channel-2 is selected.
Note: If user does not press any key for 10 seconds, it will exit the channel setting mode and transmit the RF signal. The main unit
will register the temperature reading.
(If the transmitter has the LCD display, the C/F key will toggle the temperature unit on the LCD.) As the channel 4 & 5 are reserved
for other models, please never set the remote sensor to channel 4 & 5.
REMOTE CHANNEL AUTO-SCROLLING
This device is equipped with an auto-scroll function. While the auto-scroll function is set, the unit will automatically cycle
to display the temperature of each remote sensor for 6 seconds.
1. To retrieve manually the specific sensor temperature reading, press CHANNEL key until desired channel number is
displayed.
2. To enable auto-scroll function, use CHANNEL button to select channel 1, 2, ... until auto scroll icon appears on the left
hand corner of the 3rd line display.
SET THE CLOCK, CALENDAR & LANGUAGE
1. Press & hold [CLOCK] button for 2 seconds to enter clock setting mode. Flashing 24 hours will appear.
2. Press [
] or [ ]
button to switch between 24 hours and 12 hours format, and then press [CLOCK] button to confirm.
3. The hour digits will flash. Use the [
] button to increase by one hour or [ ]
button to decease by one hour to your desired
hours. Holding down either button will change the increment unit rapidly. Press [CLOCK] button to confirm.
4. The minute digits will flash. Use the [
] button or [
] button to set your desired minutes. Holding
down either button will change the increment unit rapidly. Press [CLOCK] button to confirm.
Note: Every change of minute digit will automatically reset the seconds to zero.
5. The year digit will flash and Yr icon appears. Press [
] or [ ]
button to set your desired year. Press [CLOCK] button to
confirm.
Note: Year range is from 2000 to 2099.
6. D and M icons will flash. Press [
] or [ ]
to select D M (Date Month) or M D (Month Date)
format. Press [CLOCK] button to confirm.
7. Month digits will flash. Press [
] or [
] button to set your desired month. Press [CLOCK] button to confirm. Do the same
to set Date.
Note: The weekday will be automatically calculated and displayed for the date set above.
8. E digit will flash. Press [
] or [ ]
button to switch 5 languages display of weekday (English/German/French/Spanish/
Italian. See table 1). Press [CLOCK] button to confirm and exit setting mode.
Note: If no key press during setting mode for 10 seconds, it will automatically keep the setting and exit to normal display.
Table 1

Содержание

Похожие устройства

Скачать