Home
Главная
Hama
Метеостанция
EWS-890
Инструкция по эксплуатации Страница: 5

Hama EWS-890 Инструкция по эксплуатации онлайн [5/47] 297907

6. Operation

Note – Input

Hold down the CH+ button (13) or the MEM– button (17) to

select the values faster.

6.1. Connection to the measuring station

•After you insert the batteries, the base station automatically

searches for a connection to the measuring station and performs

initial setup.

Note

•Initial setup takes approx. 5 minutes.

•During connection, the wireless symbol on the measuring

station radio symbol will ash (7).

•Do not press any buttons during setup. Otherwise, values

may not be transmitted correctly and there is a risk of value

errors and inaccuracies.

•The setup process is completed when the indoor (2, 3) and

outdoor (8, 9) measurement data is displayed.

•If the base station still does not receive a signal from the

measuring station, press the SENSOR button (15) to start the

manual search for the signal. During the connection attempt, the

measuring station radio symbol (7) will ash.

•During the manual search, press and hold the SENSOR button

(15) for approx. 3 seconds to end the search. The radio symbol

(7) disappears.

6.2. Selecting the channel/other measuring stations

Note

•You can install two more measuring stations in addition to

the included measuring station. Ensure that the base and

measuring stations are set to the same channel.

Visit www.hama.com for suitable measuring stations.

•Press the CH+ button (13) repeatedly to set the channel to that

set on the respective measuring station – see 4.1. Measuring

station. Either 1, 2 or 3 (11) is displayed.

•The base station now shows the data measured (8, 9) on the

selected measuring station (11).

•Press and hold the CH+ button (13) to select the channel scan.

The measurement values of the individual measuring stations/

channels (11) are displayed consecutively for 4 seconds each.

•Press the CH+ button (13) again to return to normal mode.

6.3. Basic and manual settings

Automatic setting using the DCF signal

After the rst time the base station is switched on and successful

transmission is established between the base station and the

measuring station, the clock will automatically search for a DCF

signal. During the search, the wireless symbol (5) will ash.

When the radio signal is received, the date and time are

automatically set.

Radio icon Signal strength

No reception

Poor

Fair

Excellent

Radio icon

Searching for the

DCF signal

Flashing display Active

Constant display

Successful – signal is being

received

No display Error – signal search ended

Note – Time settings

•If, during initial setup of the device, a DCF radio signal is not

received within the rst few minutes, the search is aborted.

The radio symbol disappears.

•If there are reception problems, we recommend leaving

the clock to sit overnight, since interference is generally

less at night.

•In the meantime, you can start a manual search for the DCF

radio signal at another location or you can manually set the

time and date.

•The clock automatically continues to search for the DCF

radio signal on a daily basis (2:00 a.m., 8:00 a.m., 2:00

p.m. and 8:00 p.m.). If the signal is received successfully, the

manually set time and date are overwritten.

Hama EWS-890 Инструкция по эксплуатации онлайн [5/47] 297907

Содержание

Похожие устройства