Hama EWS-890 [6/47] Ummer time
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hama EWS-890 [6/47] Ummer time

Hama EWS-890 [6/47] Ummer time
5
•Press the RCC button (19) to start the manual search for the
DCF radio signal.
Note – Manual search
•The manual search is automatically aborted after 6-16
minutes.
•Using the RCC button (19) frequently will drain the battery.
We recommend only using this function to seek out an
optimal location for the device.
Note – Summer time
The clock automatically switches to summer time. DST appears
on the display as long as summer time is activated.
Manually setting
•Press and hold the DISPLAY SET button (16) for approx. 3
seconds
to make the following settings one after the other:
•12/24-hour format (1)
•Hours (1)
•Minutes (1)
•Seconds (only zeros possible) (1)
•Time zone (1)
•To select the individual values, press the CH+ button (13) or the
MEM– button (17) and conrm each selection by pressing the
DISPLAY SET button (16).
•If you do not make an entry for 60 seconds, you automatically
exit the setup mode.
Note – Time zone
•The DCF signal can be received over long distances, but
always transmits the current Central European Time in
Germany. Make sure you account for the time difference in
countries with another time zone.
•If you are in Moscow, the time is 3 hours later than in
Germany. This means that you should set +3 for the time
zone. The clock then automatically sets the time to 3 hours
after the DCF signal received or relative to the manually
set time.
Alarm
•Press and hold the ALARM SET button (12) for approx. 3
seconds to set the time of the alarm displayed. The hours display
begins to ash.
•Press the CH+ button (13) or the MEM– button (17) to select
the hour for the alarm time and conrm your selection by
pressing the ALARM SET button (12). The minutes display
begins to ash.
•Repeat the process to set the minutes for the alarm time.
•If you do not make an entry for 60 seconds, you automatically
exit the setup mode.
•The alarm function is automatically activated when you set the
alarm time.
•Alternatively, you can press the ALARM SET button (12) to
display the alarm time (AL).
•Press the ALARM SET button (12) as needed to activate/
deactivate the alarm.
•The alarm symbol (4) will either be displayed or not displayed
accordingly.
•When the alarm is triggered, the alarm symbol (4) begins to ash
and an alarm sounds.
•Press the ALARM SET button (12) to stop the alarm. Otherwise,
it will stop automatically after 2 minutes.
Note – Snooze function
•While the alarm is sounding, press the SNOOZE/LIGHT
button (11) to activate the snooze function. The alarm
symbol (4) begins to ash on the display. The alarm is
stopped for 5 minutes, after which it will sound again.
•The snooze function can be used over a 24-hour period.
Celsius/Fahrenheit
•Move the °C/°F slide switch (14) to the °C or °F position to
display the temperature (2,8) in the respective unit.
6.4 Weather forecast
Based on changes in the atmospheric pressure and the data saved,
the base station is able to make weather forecasts for the next 12
to 24 hours.
Note – Weather forecast
•The weather forecast function is not available during the
rst few hours of operation because it reuqires data that is
collected during operation.
•The probability of an accurate weather forecast is around
70–75%.
•The weather forecast and the current weather are indicated by
four different symbols (6):

Содержание

Похожие устройства

Скачать